1.Three in one machineThe dehumidification and drying feeding combination is equipped with a honeycomb wheel, which can obtain stable dew point dry air. The design is divided into two types: semi open and fully sealed;

2. Suitable for factory plastic raw materials with strong moisture absorption, such as PA, PC, PBT, PRT, etc;

3. It integrates dehumidification, drying, and two-stage feeding functions, and can choose three-stage feeding function;

4. The insulated drying material bucket adopts a bottom blowing pipe design, combined with a cyclone exhaust device, to prevent heat loss, ensure temperature, and improve drying efficiency;

5. All machines are equipped with a closed-loop feeding system, which can prevent the dried raw materials from getting damp again due to contact with external air;

6. This series of dehumidification systems adopts a dual cooler structure to ensure lower return air temperature and dew point;

7. The feeding system is equipped with a cut-off valve to ensure that there is no residual raw material in the material pipe;

8. The machine is equipped with microcomputer control as standard equipment, and PLC control and LCD touch human-machine interface can be selected for centralized and convenient operation, which can control the automatic operation of the whole machine;

9. Optional dew point meter to monitor dew point at any time.

Fully sealed:

Note: 1) "*" indicates that the fan outlet is connected to a bypass valve;

2) The machine voltage specification is 3 Φ, 400V, 50Hz.

Product image