1、 Overview of Thermal Oil Heating Reactor
The heat transfer oil heating reactor is a reactor that uses heat transfer oil as a heat transfer medium for heating. There are two types of heat transfer oil heating reaction vessels. One is the standard jacket type heat transfer oil heating reaction vessel, which uses heat transfer oil as the circulating medium for heat exchange, circulation heating or cooling. This requires the configuration of a hot oil tank and a cold oil tank, otherwise the heat waste is relatively serious. One type is a heat transfer oil heating reactor with an electric heating tube. This type of reactor is a reactor with its own heating function. This type is usually used for heating and does not require cooling. The thermal oil heating reactor that we often refer to usually refers to an electric heating reactor.
2、 Characteristics of Thermal Oil Heating Reactor
The thermal oil heating reactor uses thermal oil heating, with a high heating temperature of up to 320 degrees Celsius, fast heating speed, and uniform heating. Due to the high heating temperature, the heat transfer oil heating reaction kettle is equipped with an insulation layer on the outside, which has good insulation effect and less heat loss. The heating power is configured according to the heating requirements, and commonly ranges from 1kw to 108kw. The heat transfer oil heating reaction kettle is generally equipped with a stirring system, which is configured according to the material characteristics and reaction characteristics. It can be ordinary blade stirring, anchor stirring or anchor frame stirring with scraping wall stirring. The suitable material characteristics vary depending on the stirring speed and form. Therefore, when ordering, it is necessary to clarify the basic characteristics of the material, such as viscosity and concentration. The structural form of the heat transfer oil heating reaction kettle can also be customized non-standard. The atmospheric pressure reaction tank can have an upper flat mouth, a side flip cover, a lower elliptical head or conical bottom. The reaction tank with pressure is usually equipped with upper and lower elliptical heads, which have good pressure resistance. An elliptical head with an upper cone and a lower end can also be used. The height to diameter ratio can also be set according to the material characteristics and reaction conditions.
3、 Parameter selection table for thermal oil heating reaction kettle