☆ Product Name: Thermal oil electric heater	☆ Product model:	☆ Brand: Hengde
☆ Product Category:	☆ Temperature control range:	☆ Product power:

Product Introduction

----------------------------------------------------------------------

Thermal oil electric heater [1] uses coal, heavy oil, light oil, combustible gases and other combustible materials as fuel, and thermal oil as the heat carrier. Using a circulating oil pump to force liquid-phase circulation, heat energy is transported to the heating equipment and then returned to the reheated DC special industrial furnace. Thermal oil, also known as organic heat carrier or heat medium oil, has been used as an intermediate heat transfer medium in industrial heat exchange processes for more than 50 years. Organic heat carrier furnace is a new type of special boiler that uses heat conduction liquid as the heating medium. Has low pressure and high temperature working characteristics. With the development of industrial production and the advancement of science and technology, organic heat carrier furnaces have been continuously developed and applied. Although the working pressure of organic heat carrier furnaces is relatively low, the temperature of the heat transfer fluid inside the furnace is high, and most of them have flammable and explosive characteristics. Once a leak occurs during operation, it will cause accidents such as fire and explosion, and even cause casualties and property damage. Therefore, the safe operation and management of organic heat carrier furnaces must be highly valued. Thermal oil electric heater is a new, safe, efficient and energy-saving special industrial furnace that can provide high-temperature heat energy at low pressure (normal pressure or lower pressure). It uses thermal oil as the heat carrier, circulates the heat carrier through a hot oil pump, and transfers heat to the heating equipment.
The electric heating thermal oil furnace system consists of an explosion-proof electric heater, organic heat carrier furnace, heat exchanger (if any), on-site explosion-proof operation box, hot oil pump, expansion tank, etc., which are combined into one pry block. Users only need to connect the power supply, medium inlet and outlet pipelines, and some electrical interfaces to use it.
For a heat transfer oil heater, heat is generated and transmitted by an electric heating element immersed in the heat transfer oil. Using the heat transfer oil as a medium, a circulation pump is used to force the heat transfer oil to circulate in the liquid phase, transferring the heat to one or more heating devices. After being unloaded by the heating devices, the heat is returned to the heater through the circulation pump, absorbed again, and transferred to the heating devices. This process repeats itself, achieving continuous heat transfer and raising the temperature of the heated object to meet the heating process requirements.