Telescopic Pneumatic Mast Series

Clark Masts has various telescopic pneumatic masts, ranging in height from 1.2 meters to over 30 meters.

We can use our rooftop trolley system to install higher masts onto vehicles.

Clark mast also has various installation accessories.

Our mast has been certified by MIL STD 810F and has been tested and validated in various situations.

AX series

The AX series telescopic mast is designed for vehicles equipped with cameras, whether they are traditional cameras or thermal imaging. They are typically used for emergency service command vehicles, safety vehicles, crowd control, traffic monitoring, or law enforcement vehicles.

DAF series

The DAF (Expandable Antenna Field) series is based on the ST and NT series masts and is equipped with integral on-site support legs. They are equipped with an integral manual pump for stretching and have four adjustable steel legs for easy installation. Using 3.25mm wall anodized aluminum tube, each expansion part is machined with a full-length keyway.

FT series

The FT series mast is a telescopic mast based on the QT series mast, equipped with integral support legs for quick deployment

MT series

The MT series telescopic mast is made of aircraft grade aluminum alloy pipes with a diameter of 4 ", and is shown here using a more commonly used rope fixing method rather than on-site support legs. The MT mast series has a key control part that prevents rotation. Made of high-strength 3.25mm wall mounted aircraft grade aluminum alloy, available in non rotatable or rotatable versions. You can use a regular collar or a clamp (lock) collar.

NT series

The NT series mast is part of the Clark Masts telescopic mast series and features a key control section to prevent rotation.

Made of 3.5 "diameter, high-strength 3.25mm wall mounted aircraft grade aluminum alloy, available in non rotatable or rotatable versions.

You can use a regular collar or a clamp (lock) collar.

PT series

The PT series telescopic mast is a medium-sized pneumatic mast used as a communication mast, CCTV mast, antenna mast, radio antenna mast, microwave antenna mast, camera mast, etc.

QT series

A lightweight and portable telescopic mast system that can provide a height and load of 3 to 15 meters. It can be installed in various ways, including on-site installation, wall or bulkhead installation, and vehicle mounted installation.

ST series

The ST series mast is the starting point of the Clark mast telescopic mast series, with a key control part that prevents rotation.

Made of high-strength 3 "diameter 3.25mm wall mounted aircraft grade aluminum alloy, available in non rotatable or rotatable versions.

You can use a regular collar or a clamp (lock) collar.

TM series

The Clark Masts TM series ultra heavy pneumatic telescopic mast has a base pipe diameter of 9 inches and up to 9 expansion joints.

TM mast offers multiple models and load ranges, with a maximum weight of 500 kilograms and a height of 2 to 34 meters.

WT series

The base diameter of the Clark Masts WT series heavy-duty pneumatic telescopic mast is 6 inches, with a maximum of 9 expansion joints.

WT masts are available in various models and ranges, ranging from 15 kilograms to 150 kilograms, with extension heights ranging from 2 meters to 30 meters.

Ideal telescopic communication mast. The mast can be installed on vehicles, installed on-site, and installed with our roof trolley system for maximum extension height.

XT series

The Clark Masts XT series heavy-duty pneumatic telescopic mast has a base pipe diameter of 8 inches and up to 9 expansion joints.

The XT mast provides a height of up to 400 kilograms and an extension height from 2 meters to 34 meters.

Ideal telescopic communication mast.

The mast can be installed on vehicles, installed on-site, and installed with our roof trolley system for maximum extension height.

The XT mast can also be used on our 804 series trailer mast.

YT series

Clark Mast's YT series telescopic mast combines a large head load and a high extension height relative to the retraction length.

Very suitable for use as mobile communication masts, telecommunications masts, and at lower heights, providing a competitive alternative to larger masts.

When used in conjunction with the Clark Masts roof push system, the YT series provides a 21 meter extension height when installed on 4x4 vehicles.

ZT series

The base pipe diameter of the Clark Masts ZT series heavy-duty pneumatic telescopic mast is 7 inches.

ZT offers multiple models and load ranges, with a maximum weight of 220 kilograms and a height of 2 to 34 meters.

Ideal heavy-duty telescopic communication mast. The mast can be installed on vehicles, installed on-site, and installed with our roof trolley system for maximum extension height.

ZT mast can also be used on our 803 series trailer mast.