Due to the common defects of high failure rate, large impact, poor running stability, poor starting control performance, high power consumption, high maintenance cost, and difficult maintenance in various traditional single traction machines, this new type of traction machine has been developed to solve these problems; This model has the following characteristics:
1. The use of a new type of track greatly improves the guidance accuracy, making the traction head run more smoothly and with less resistance;
2. The clamping machine head is not equipped with a clamping power device, and the weight of the machine head is only 100 kilograms, which is 1/4 of the weight of a regular machine head. This reduces the impact during operation, makes the start stop sensitivity, effectively improves control performance, and also reduces the power of the traction motor by 1/3;
3. The clamping machine head has no control box or control components, so there is no need to worry about the failure of the machine head control system, greatly reducing the failure rate and reducing the difficulty of maintenance; The absence of important vulnerable parts such as sliding contact wires and current collectors reduces maintenance costs;
4. The traction motor uses a 4/8-pole dual speed variable frequency motor, which provides sufficient smooth operating frequency for low-speed traction and eliminates the problems of crawling and unstable traction force during low-speed traction;
5. This model uses dual wire rope transmission and is equipped with a pneumatic mechanism for clamping the material support plate and pressing the claw action at the end of the extruder;