Working principle and structure

TY type is made of cast iron, with good corrosion resistance and simple structure. When there is a high sealing requirement in the closed state, a copper sealing surface can be embedded on the door frame, with a width generally not exceeding 2m.

TYZ type is a steel structure with rubber sealing, three or four sided waterproofing, and can also be reverse waterproofing. It is not limited by specifications and is suitable for any occasion. When made of stainless steel, it has a long service life.

TYX type has good sealing effect, almost reaching a "zero leakage" state The applicable width can reach 6m or more, but the regulating water level is generally below 800mm. It is particularly suitable for alternating operation of oxidation ditch drainage or large water distribution well water distribution. It is equipped with a dedicated opening and closing device, and only manual or electric operation is required, without the need to use an additional opening and closing machine.

Ordering Instructions

1. Indicate the model, specifications, and quantity of the barrier gate.
2. The material (carbon steel or stainless steel) of the steel barrier gate and rotating barrier gate should be specified. If the steel barrier gate needs to be reverse sealed, please specify Please specify when anti-corrosion is required.
3. The height H from the center of the gate to the platform of the hoist shall be indicated for cast iron gates and steel direct acting gates.
4. For non-standard barrier gates, our company can provide users with civil engineering embedded part drawings and design them according to requirements.