TS300 Active Vibration Reduction System - Tablestable Active Vibration Isolation Platform - Desktop Vibration Reduction Platform TS-300/LP/TP25 Product Description:

TS300 Active Vibration Reduction System - Tablestable Active Vibration Isolation Platform - Desktop Vibration Reduction Platform TS-300/LP/TP25 is the largest model in the TS series products. It is a compact dynamic vibration isolation system that can be used to counteract unnecessary vibrations caused by the working environment on high-sensitivity precision equipment, in order to improve the working performance of precision equipment. It is easy to use, has excellent vibration isolation performance and versatility.

working principle:

The TS series active isolation table adopts advanced isolation technology, which can isolate vibrations in 6 spatial directions (including horizontal and vertical directions). Table stable vibration reduction table active isolation table shock resistant table TS-300 uses the piezoelectric acceleration sensor in the controller to convert the pressure signal of external vibration into an electrical signal and send it to the piezoelectric transducer in the isolation module. Then, the piezoelectric transducer will generate a pressure signal equal in magnitude to the incoming pressure but opposite in direction to eliminate the incoming vibration. The isolation system utilizes a feedback loop to eliminate mechanical resonance in the isolation system.

TS300 Active Vibration Reduction System - Tablestable Active Vibration Isolation Platform - Desktop Vibration Reduction Platform TS-300/LP/TP25 Technical Parameters:

• Model: TS-300/LP/TP25 ※ Optional TS-300/LP
• System configuration: fully integrated
• Active isolation range: The frequency is approximately 0.7-200 Hz (passive isolation is considered above 200 Hz)
• range: 20 um (vertical and horizontal)
• Height adjustment: automatic
• Locking during handling or transportation: automatic locking function
• Isolation condition: It can be observed on the front display screen. The 8-axis vibration status can be observed by connecting the oscilloscope to the BNC socket on the rear panel.
• Installation board size: 600 (W) x 800 (D) mm
• Overall dimensions (approximately) 600 (W) x 800 (D) x 121 (H) mm
• Load capacity (equivalent/low center of gravity): 300 kg (considering the eccentric weight on the load, please use within 80% of the maximum load capacity).
• System weight (approximately): 60 kg
• Input voltage: 90-120VAC, 200 ～ 240 VAC, 43-60 Hz
• Power consumption: maximum 10 W during isolation period, maximum 20 W during load adjustment period
• Temperature range: 5 ℃~40 ℃
• Relative humidity: 10-90% (5-30 ℃), 10-60% (30-40 ℃)
• Service location: For indoor use only
• Working height: up to 2000 meters
• Option 1 TP25 mounting plate: Ferromagnetic brushed stainless steel 410 surface, unpainted,
• M6-25mm XY matrix drilling and screw holes, effective tapping depth: 6 mm
• Option 2 Remote Control Box
• Option 3: High rigidity frame with built-in vibration reduction function

Upgrade options:

• Workbench integration (including shelves, monitor brackets, keyboard trays, etc.)
• Integrated soundproof speakers (such as silencers, AEK-2002, and customized soundproof equipment)
• Customized panel size and material (usually damping aluminum plate, the panel can be customized with stainless steel, ferromagnetic steel, and can be perforated)
• Integrated vibrator (excitation source)
• Remote display (weight distribution, internal motor leveling, X/Y/Z axis vibration level, start/stop components, switch isolation table)
• Remote power supply (free from electromagnetic noise or thermal interference)
• Increase load capacity (TS-140 and TS-300 can increase load capacity by 40kg)

TS300 Active Vibration Reduction System - Tablestable Active Vibration Isolation Platform - Desktop Vibration Reduction Platform TS-300/LP/TP25 Vibration Isolation Effect:

Comparison chart of vibration damping table performance: AFM researchers conducted imaging under two unique conditions: without vibration isolation system and with TS series vibration isolation table. When using the TS series isolation table with AFM, the obtained images show a significant improvement in image quality and overall measurement clarity.