Instrument Introduction:

The Autolab series electrochemical workstations are renowned for their modular design, robust stability, and top-notch software. The PGSTAT302N electrochemical workstation is a universal high-performance electrochemical comprehensive tester in the Autolab series, which can meet the majority of users' testing needs. On this basis, it can also configure all optional modules and external devices to meet special testing requirements.
Optional extension modules:
FRA2 frequency response analysis module/BOOSTER 10A high current expansion module (10A)/BOOSTER 20A high current expansion module (20A)/BA dual potentiostat module/ECN electrochemical noise module/ECD low current amplifier module/LOAD INT dynamic load interface/VOLT MULT turbocharger module/HIGH VOLT.DIV voltage divider module/AUX multi-channel sequence testing module/ADC10M ultra fast sampling module/SCAN250 ultra fast linear scanning module/FI20 module/pX module
Optional attachments:
Electrolytic cell and accessories/RDE rotating disk electrode/RDE optional ring disk electrode/corrosion electrolytic cell/flat electrolytic cell/gold plate applicator/VA663 polarographic workbench/EQCM quartz crystal microbalance
Main application areas:
>Electrical analysis;
>Corrosion;
>Energy storage devices (fuel cells, batteries, solar photovoltaic cells, supercapacitors, etc.);
>Electroplating, electrolysis, and electro synthesis;
>Biosensors;
>Micro nano devices
>Spectroelectrochemistry

Technical parameters:

Ø Maximum output current: ± 2A
Ø Maximum output voltage: ± 30V
Range of applied potential: ± 10V
Ø Maximum sweep rate of cyclic voltammetry: 250V/s
Ø Precision of applied potential: ± 0.2% of ± 2mV set
Ø Current range: 10nA-1A nine levels, automatic selection range
Ø Accuracy of current application and measurement: ± 0.2% of current and ± 0.2% of current range
Ø Applied current resolution: 0.03% of the current range
Ø Measurement current resolution: 0.0003% of the current range
Ø Input impedance:> 1Tohm//8pF
Response time:< 250ns
Ø AC impedance frequency range: 10 μ Hz-1MHz

Main features:

>Modular design with strong scalability;
>The front panel of the instrument comes with a high-definition LED backlit LCD display screen, which can display current and potential values in real time;
>Two external signal input/output channels can automatically control RDE, RRDE, VA663, EQCM, etc;
>The sampling frequency can reach up to 50 kHz. If the ADC10M module is configured, the sampling frequency will increase to 10MHz, which means taking a point every 100ns;
>AC impedance can be measured in full range at once without the need for segmented testing. Meanwhile, it is allowed to set different wave amplitudes for each frequency. It can provide measurement modes with multiple waveforms (5 or 15 waveforms), greatly reducing the testing time for low-frequency parts. Support fluid dynamics communication impedance
EHD method, intensity modulated photocurrent spectroscopy IMPS method, and intensity modulated photocurrent IMVS method.
>Up to six impedance testing modes: conventional frequency sweep impedance measurement method under single potential; Potential frequency scanning; Time frequency scanning under constant potential; Frequency scanning under single current; Current frequency scanning; Time frequency scanning;
>Based on Microsoft The NOVA software developed by NET not only supports almost all curing electrochemical measurement methods, but also allows users to
Design various measurement conditions to develop unique measurement methods, and freely realize one's own ideas and needs.
>>A program that includes all DC and AC methods
>>Automatically store data, so you don't have to worry about sudden power outages
>>Supports USB mode: 80000 data points per measurement
>>Support all new instruments and modules
>>Can record any number of additional external signals
>>Choose any 2D or 3D graphics
>>Users can customize dynamic programs and attach programs for data analysis processes
>>Can perform unlimited number of step methods and can turn off or on data sampling