Changzhou Tianjing Experimental Instrument Factory
Home>Products>Super constant temperature circulating oil bath pot (6L, 15L, 30L)
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13585400372,18136698566
  • Address
    No. 22 Hongshan Road, Jincheng Industrial Park, Jintan City, Jiangsu Province
Contact Now
Super constant temperature circulating oil bath pot (6L, 15L, 30L)
The super constant temperature circulating oil bath uses oil as the heating medium, and the oil in the tank is pumped out of the machine through a sta
Product details

1Super constant temperature circulating oil bath potbrief introduction

Super constant temperature circulating oil bath potIt uses oil as the heating medium and pumps the oil in the tank out of the machine through a stainless steel circulation pump to establish a second constant temperature field. The instrument is equipped with an external circulation interface and can be connected to experimental equipment outside the instrument, such as reaction vessels. Widely used in distillation, drying, concentration, and impregnation of chemical or biological products. It is an ideal tool for laboratory technicians in universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgy, chemical, medical and other units.
2、 IISuper constant temperature circulating oil bath potTechnical parameters:
model
HH-W6
HH-W15
HH-W30
HH-W50
HH-W80
HH-W100
Temperature Control Range
Room temperature 300.0 ℃
precision
±0.1℃
temperature control
Microcomputer LCD screen display, PT100 sensor
fluctuation
±0.1℃
uniformity
±0.1℃
Power
1000W
2000W
3000W
4000W
5000W
6500W
output power
Thyristor
Solid state relay
Constant temperature timing
One minute to 100 hours or normally open
Cycle timing
0-120 minutes or normally open
Circulating flow rate
5L/min
5L/min
8L/min
15L/min
30L/min
50L/min
Working Size
280×200
×180mm
400×300
×180mm
400×300
×180mm
500×300
×180mm
500×400
×180mm
500×500
×180mm
opening size
210×130
×180mm
300×265
×180mm
300×265
×180mm
350×300
×180mm
400×330
×180mm
500×330
×180mm
power supply
220V50HZ
380V50HZ
HH-3、 Super constant temperature circulating oil bath potcharacteristic:
I. Microcomputer intelligent control system, rapid temperature rise, stable temperature, Chinese operation interface, simple operation.
II. Water oil dual-use design, with the highest temperature reaching up to 300 ℃.
III. Large screen LCD display, high brightness background light, simultaneous display of set values and measured values, clear and intuitive.
IV. Optional cold water circulation device can be equipped to quickly cool down the box by introducing tap water, suitable for temperature control of exothermic reactions at high temperatures.
V. Suitable for double-layer jacket reaction vessels, chemical pilot reactions, semiconductor industry, and high-temperature distillation drying, etc.
4Super constant temperature circulating oil bath potusage method:
1. Before installing the equipmentSuper constant temperature circulating oil bath potPlace it on a flat workbench and conduct a visual inspection first: the appearance should be undamaged, the instrument appearance should be intact, the power cord should be undamaged, the plug should be intact, and the power switch should be flexible. Each device's power cord is connected to a single-phase three pole plug, with the electrode above the plug being the grounding wire. Users must use a power socket with a safety grounding when using it.
2. Before powering on, add an appropriate amount of thermal oil to the fuel tankTo leave the top cover5-8cm is suitable.
3Setting and use of digital temperature control instruments:
(1) Turn on the power switch, the power indicator light is on, turn on the heating switch,The temperature controller is on, wait for about20After seconds, the upper row displays the actual temperature inside the box, while the lower row displays the set temperature. Click on the function key, the upper row will displayspThe lower row displays the set temperature, clickperhapsSelect the working temperature, click the function key again, and the upper row will displaystThe lower row displays the time required for heating, clickperhapsSelect the constant temperature timing time, and if there is no need for timing, set the time to00.00 will complete the setting. Click the function key again to exit, and the system will run according to the set parameters.
(2) Place the reagent bottle that needs to be heated inside the boxIf using external circulation, please connect the circulation tube before heating)Turn on the circulation switch, and the oil will circulate in the tank to ensure the uniformity of oil temperature at all points inside the tank.
(3) After the experiment is completed, turn off the loop switch first, and then set the temperature to0. Turn off the heating switch, then turn off the power switch and cut off the power.
5Super constant temperature circulating oil bath potmatters needing attention:
1. All technical indicators of this series of products have undergone actual operation inspection before leaving the factory. If the user needs to use their own thermometer due to process requirementsHas a certain degree of accuracy)When conducting measurements, the user's thermometer shall prevail. If there is a difference between the value displayed on the temperature control instrument and the thermometer, the user will adjust the displayed temperature to the actual temperature through the internal temperature control instrument.

2Super constant temperature circulating oil bath potWhen using, it is necessary to refuel before powering on, and dry burning is strictly prohibited.
3
When in use, there must be a reliable grounding to ensure safety.
4
If the oil level is lower than the electric heating tube, it is not allowed to use it with electricity to prevent the electric heating tube from bursting and being damaged.
5
The oil level should not be too high to avoid overflowing into the electrical box and damaging components.
6
Regularly check whether the screws of each contact are loose, and if they are loose, tighten them to maintain good contact of each electrical contact.
7. Please wear safety gloves when using to avoid burns

If there are customers with different requirements, we can customize production according to their requirementsSuper constant temperature circulating oil bath pot.

Product related keywords: Super constant temperature circulating oil bath pot
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!