Steel dam gates are mainly used for urban water use, landscape construction, irrigation and other occasions. They are our company's independently developed product to replace rubber dams. It is a new type of adjustable overflow gate, which consists of a civil structure, a steel gate body with a fixed shaft, and opening and closing equipment.

- Storage height

Suitable for wide gate openings (10-100 meters) with relatively small water level differences

One door width

The working condition (17 meters), due to its wide design, can save several gate piers.

- Steel dam gate

It is possible to store water through vertical gates, discharge water through horizontal gates, adjust the water level appropriately, and use the top of the gate to pass water, creating a landscape effect of an artificial waterfall.

Characteristics of Steel Dam Sluice:

1. Suitable for gate hole width, saving civil engineering investment;

2. The time for dam lifting and collapse is short, generally less than 2 minutes; But the rubber dam normally takes 2-3 hours to complete.

3. Long service life, generally up to 50-60 years; Rubber dams are prone to aging, especially in the northern winter when ice blocks can easily puncture them.

4. High degree of automation; Rubber dams are generally difficult to achieve.

5. Using mechanical locking, it can be locked at any angle during dam lifting, collapse, and water level adjustment; Rubber dams require continuous inflation to prevent dam collapse.

6. Energy saving: A 100 meter steel dam gate only requires 4 driving devices, with a power load of 60kw/h, and only needs to run for 2-3 minutes; And the 100 meter rubber dam requires electricity

The load is 100kw/h and it takes 2-3 hours to complete.