TG-860A Static Sandbag MethodThe photovoltaic module mechanical load testing machine is used to verify the ability of the module to withstand static and dynamic loads such as wind pressure, snow pressure, or icing at different installation angles. Widely used for testing the compressive strength of photovoltaic modules, dynamic holding pressure technology is used to simulate load tests to understand the compressive capacity of modules under wind pressure, snow pressure, static pressure, and ice load.

TG-860A Static Sandbag MethodPhotovoltaic module mechanical load testing machineApplicable to standards:High precision simulation testing equipment developed and produced for testing standards such as IEC62782, IEEE1262, IEC61215, UL1703, etc. Static mechanical load testing of photovoltaic modules is a very important test in international standards for verifying the ability of modules to withstand static loads.

TG-860A StaticSandbag method mechanical loadIntroduction to testing machine:

The degree to which photovoltaic modules can withstand various loads. In the process of many years of practice, the standards and specifications for mechanical load testing have gone through different stress forms such as sandbags, cylinders, water bags, and wind tunnels to verify the rationality of pressure applicationDifferent stress values such as 2400Pa, 5400Pa, 8000Pa were used to verify the different requirements for mechanical load resistance. A dynamic mechanical load of 1000Pa was developed every three seconds to simulate changes in wind, and low-temperature mechanical loads were also developed to verify the mechanical load bearing capacity in extremely cold climates.

The mechanical load equipment bracket adopts an industrial aluminum profile design mechanism to apply pressure,The current standard of IEC61215 includes load testing, which applies pressure to the surface of the component to observe its changes. The operation is convenient and fast, the pressure is uniform, and the aluminum profile bracket is easy to install. It is the most economical and practical static load testing equipment.

TG-860A StaticSandbag method mechanical loadIntroduction to Testing Machine Parameters:

1: Testing Platform: Industrial Aluminum Profile

2: Maximum test size: 3000x2000mm (customizable)

3: Component payload test size: 2500mmx1500mm (customizable)

4: Component surface load: 2400pa, 5400pa, 8000pa, controllable and adjustable.

5: Pressure control accuracy: ± 2%

6: Application method: Sandbag

7: Sandbag weight: 5KG, 10KG, 15KG, 20KG (customizable)

8: Number of sandbags: 300.

9: Dust free sandbag: The dust-free sandbag carefully developed by Taigui Instrument solves 98% of the load testing troubles in the photovoltaic industry. Can completely solve the sandbag method test,The problem of leaving dust on the components.