HBT-004 Standard Sampling Equipment Soil SamplerUsage

Connect the T-shaped handle, an extension rod, and a heart-shaped soil drill bit with a wrench.

Rotate the T-shaped handle clockwise, and the drill bit will slowly penetrate into the soil.

3. When reaching a fixed depth, rotate the T-shaped handle with a reversible clock and remove the drill bit.

4. Use a scraper to remove soil samples from the drill bit and complete the sampling in one go.

After use, please wipe all equipment clean with a cloth and put it in a portable bag.

HBT-004 Standard Sampling Equipment Soil SamplerTechnical parameters and configuration

1. Stainless steel heart-shaped loam drill bit (treated with titanium) made of manganese steel, with a blade width of 4cm and a blade spacing of 6cm,

One sampling length of 20cm, threaded connection; One

2T handle length 35cm, threaded connection; One
3 extension rods with a length of 50cm, threaded connection for one
Extend the rod by 100cm and connect it with threads; One
5 scraper blades with a width of 20mm are used for scraping soil samples; One
6 wrench 19 × 22mm, used for disassembling and installing sampling drills; Two of them
7 gloves with good breathability on the back of the hand, made of cowhide material; A pair
8 steel tape measure 3 meters; One
A portable bag with a length of 110cm is used to store the above-mentioned components; One