1、 Characteristics
The stainless steel ribbed water tank is made of high-quality food grade stainless steel SUS304, which is bent into corrugated ribbed plates according to the national standard atlas 02S101 and welded on site.
Its main features are:
1. There are no tension bars inside the box, but there are reinforced channel steel outside the box.
2. The size of the box is not limited by geometric modulus and can be made into any size of water tank according to user requirements.
3. Less welding seams can reduce water tank leakage caused by poor welding quality.
4. Long service life.
5. The height of the water tank is generally controlled below 3m.

2、 Overview
　　The Qianshun brand series water tanks are made of high-quality sheet metal and welded with argon arc on site.All aspects of this series of products have been tested to meet the "Sanitary Standards for Drinking Water"GB5749-85This series of water tanks can be customized according to user needs, are not easily deformed, have strong seismic resistance, are corrosion-resistant, easy to clean, and have a long service life.

threeScope of application
Mainly suitable for regulating domestic water tanks, building water supply, fire water tanks, storage water tanks, expansion and condensation water tanks for heating systems, temporary water tanks for building construction, road construction, geological exploration, and national defense projects. The water tank can store both cold and hot water, and is resistant to acid, alkali, seepage, leakage, deformation, and corrosion.

4、 Selection instructions

1. When placing an order, the size of the water tank, the location of the connecting pipe, and the diameter of the pipe should be provided.
2. It is advisable to use a water storage temperature of 4-65 ℃. If the water storage temperature is higher than this value, it can be raised during ordering and resolved separately.
3. The load of the water tank on the ground should be determined by the structural designer.
4. When the water tank connection position provided by the user happens to be at the board joint, our company needs to adjust it, and the pipe diameter remains unchanged (without further notice to the user).