Spray+activated carbon adsorption group legal treatment of furniture spray painting exhaust gas treatment device

spray+The activated carbon adsorption combination method is a commonly used, compliant, and cost-effective method for treating triphenyls. It has a wide range of applications and is also suitable for the treatment of paint exhaust gases from furniture. Due to the widespread presence of dust in furniture factories, pre-treatment through spraying can filter out some of the dust. At the same time, adding a small number of devices to the spraying tower can filter out the dust. The furniture painting exhaust gas pre treated by spraying enters the activated carbon adsorption device for adsorption and purification after defogging. As long as the air volume design is moderate and the equipment layout is reasonable, the purified furniture spray painting exhaust gas can meet the required emission standards.

spray+Activated carbon adsorption combination methodThe characteristics are:

1Good purification efficiency, reasonable design and layout, and able to meet emission standards.

2There is less maintenance in the later stage, so there is no need for much maintenance. Regular inspections and checks are needed to ensure that the water pump and fan are running properly. If any abnormalities occur, contact the manufacturer.

3Consumables: The consumable is activated carbon, which needs to be replaced regularly and is generally related to the concentration and air volume of the exhaust gas. Most manufacturers6month-12Replace or desorb every month. Each time the fee is changed6000-10000左右。

4The air flow control is generally in10000M3/H,Governable10000-50000M3/HSpray painting exhaust gas.

5The venue requirements are relatively high. It occupies a relatively large area.

For small air volume,Low concentration furniture spray painting exhaust gas treatment,From the perspective of cost saving, our company has developed an integrated combination equipment based on the above method to save costs. The integrated combination equipment combines spray pretreatment and activated carbon adsorption devices as an integrated structure, saving material and operating costs. After being put into operation in the market, it was found that this combination of equipment can also achieve the expected treatment of paint exhaust gas.