product description

·The working arm can turn 680 degrees.

·The work areas with loads of 120, 230, and 300 kilograms are monitored by an automatic 'Area Manager' safety system.

·Four independent hydraulic support feet that can swing and flex left and right according to the environment, allowing the platform to operate on uneven surfaces and stairs. Suitable for indoor operation and use.

·The four independent hydraulic support feet can be controlled in the following two forms: when the support feet support the ground and when retracted, they are operated by hydraulic pressure; The horizontal and vertical angles of the supporting feet can be flexibly controlled by hand.

·The work basket is equipped with an automatic leveling system and hydraulic left and right rotation function.

·Both the ground chassis and the work basket are equipped with control consoles.

·The ground console is a portable console that can control various movements of the arm, crane, and supporting feet.

·Equipped with an emergency hand pump, the equipment can be manually operated when there is no power source.

·The support foot is equipped with an automatic load controller to detect the pressure in real time. Therefore, when each supporting foot is in different positions, the lateral extension distance of the lifting arm will also be limited, which will keep the body balanced.

·The vertical height reaches 52 meters, but the storage size is also convenient for rental transportation, and it only takes a few minutes to rise to the top height of 52 meters.

·The vehicle is equipped with fast/slow speed, front/rear direction selection, and left/right steering functions.

·The overall body width can be reduced, making it easier to pass through narrow doors.

·The maximum driving speed is 1.5 kilometers per hour and the climbing ability is 40%.

·There is a wired dialogue system between the workbench and the ground.

·The workbench is equipped with dedicated water or gas channels connected to the ground.

·Specially designed work basket for users to quickly install and remove.

·Equipped with two independent power systems: diesel engine+220V AC+380V AC.

·When the supporting feet do not fully support the body, the lifting arm will not rise. After the lifting arm is raised, the support foot will be locked and cannot be retracted.

·Equipped with an emergency stop device.

·The hydraulic system is equipped with pressure protection valves.

·When the lifting arm and supporting feet are in the initial state, the platform has self propulsion function.