1、 Product Name:Solvent moisture analyzer_Solvent moisture detector

2、 Product model:CSY-K1

IIISolvent Moisture TesterProduct Introduction:

CSY-K1Solvent Moisture TesterIt's based on1935Annual Carl's Day off（Karl Fischer）The proposed capacity splitting method for measuring moisture contentDeveloped and produced，CSY-K1Solvent Moisture TesterThe application of microcomputer automatic control technology, using a large screen LCD display, full Chinese menu prompts for operation, rich calculation, and printing of experimental results functions, has been widely usedinternationalListed as a standard method for determining moisture in many substances.CSY-K1Solvent Moisture TesterThis method is easy to operate、High accuracy，It is an ideal instrument for testing moisture content in the petroleum, chemical, power, pharmaceutical, pesticide industries and research institutions.

4Solvent Moisture TesterTechnical products:

1Measurement method: Karl Fischer Coulomb method (electric quantity method)

2Display mode: LCD display, Chinese prompts for operation, user-friendly and intuitive interface.

3Electrolytic current:0-400mAautomatic control

4Measurement range:5ppm~100%ugH2O

5Resolution:1μgH2O

6Accuracy: Excluding injection errors:≤1mg H2OThe time error is not greater than ±3µgH2O， ＞1mgH2OThe time error shall not exceed ± of the measured value0.3%

7Printing Thermal sensitive high-speed low-noise micro printer print output

8Record storage: Storage256records

9Fault self check: automatic fault detection and prompt

10、Solvent Moisture TesterInjection methods: volume injection, weight injection, and dilution injection, with Chinese prompts for inputting various parameters of the sample

11Automatic Conversion: Automatic ConversionPPM, percentage contentmgH2OLAnd its average value

12Display unit: μgH2O、PPM, percentage contentmgH2OL

13Power consumption : Maximum60W

14Environmental temperature:5℃-45℃

15Environmental humidity: Environmental humidity ≤80%

16External dimensions:350mm×230mm×180mm

17Power supply ：AC220V±11V 50Hz±2.5Hz

18Weight:8kg

5Solvent Moisture TesterMeet the following standards：

1、GB/T7600Method for determination of moisture content in transformer oil during operation(coulometry)》

2、GB6283Determination of Moisture Content in Chemical Products by Karl Fischer Method (General Method)

3、SH/T0246Determination of Water Content in Light Petroleum Products (Electricity Method)

4、SH/T0255Method for determination of moisture content in additives and lubricating oils containing additives (electric method)

5、GB/T11133Method for determination of water content in liquid petroleum products (Karl Fischer method)

6、GB/T7380Determination of Water Content in Surfactants (Karl Fischer Method)

7、GB10670Determination of Trace Moisture in Fluorinated Methanes for Industrial Use by Karl Fischer Method

8、GB/T606Chemical reagents General method for determination of moisture Karl Fischer method

9、GB/T8350Denaturated Fuel Ethanol

10、GB/T8351Ethanol gasoline for vehicles

11、GB/T3776.1Method for determination of moisture content of pesticide emulsifiers

12、GB/T6023Determination of Trace Moisture in Industrial Butadiene by Karl Fischer Coulombic Method

13、GB/T3727Determination of trace water in industrial ethylene and propylene

14、GB/T7376Determination of Trace Moisture in Fluorinated Alkanes for Industrial Use

15、GB/T18619.1Determination of water content in natural gas by Karl Fischer method-coulometry

16、GB/T512Method for determination of moisture content in lubricating grease

17、GB/T1600-Method for determination of pesticide moisture content

18、GB/T11146Determination of Water Content in Crude Oil by Karl Fischer Coulombic Method

19、GB/T12717Test Methods for Acetic Esters for Industrial Use

20、GB/T5074Method for determination of moisture content in coking products

21、GB/T18826industrial1,1,2-Tetrafluoroethane（HFC-134a)

22Meets the technical requirements of the National Pharmacopoeia for determining the moisture content in drugs using the Karl Fischer method.http://www.csy17.com/pro565.html