Small fiber laser laser engraving machine-Fornitore globale

Tianxiong Laser, 1st Floor, Poly Industrial Park, No. 10 Huiyuan Road, Wangniudun Town, Dongguan City

Introduction to Small Fiber Laser Radium Carving Machine Equipment

The small fiber laser laser engraving machine, also known as the portable (handheld laser engraving machine), adopts a portable integrated structure design, uses a fiber laser to output laser, and then achieves marking function through a high-speed scanning mirror system. The small laser marking machine has high electro-optical conversion efficiency and is cooled by air cooling. The whole machine is small in size and light in weight, with good output beam quality, high reliability, high output power and energy saving. The most important thing is that it is easy to carry.

Characteristics of small fiber laser laser engraving machine equipment

The small fiber laser laser engraving machine has a small volume, but the laser power can also reach the same size as a regular desktop computer. Although the small fiber laser engraving machine has a small volume, its functions are the same as a regular machine, and the accessories used are the same. The amount used is also the same. Because the installation density is high, the internal installation is compact, and air ducts are used for internal air cooling and heat dissipation, so the heat dissipation will not be poor due to compactness; The use of a small fiber laser engraving machine is also very simple. It can be directly connected to a laptop with a data cable. The size of the small laser marking machine is 650mm * 200mm * 450mm; Weight approximately: around 40-50 pounds

Structural analysis of small fiber laser laser engraving machine

Parameter table of small fiber laser laser engraving machine

average output power	20W	30W	60W	100W	120W
wavelength	1064nm
Pulse width/Q frequency	Pulse width adjustable from 1ns-400ns/1KHz-2000KHz
Full power frequency range	25-400KHz	25KHz-400KHz	50KHz-400KHz	67KHz-1000KHz	80KHz-1000KHz
Marking format	110 × 110mm optional (70x70mm 150x150mm 200x200mm 300x300mm)
repeatability	＜30? μrad
Carving line speed	≤7000mm/s
Minimum line width	0.01mm	0.01mm	0.03mm	0.03mm	0.03mm
Minimum character height	0.2mm		0.04mm
Cooling method	forced air cooling
Overall dimensions (L * W * H)	800mm×680mm×1200mm
power supply	AC 220V 50KHz
upgradeable	Electric lifting manual two-dimensional worktable, electric two-dimensional table rotating fixture, red light focusing

Advantages and application scope of small fiber laser engraving machine

The application scope of small fiber laser engraving machines is roughly the same as that of desktop fiber laser engraving machines. Small laser marking machines are mainly small in size, light in weight, and easy to carry, suitable for users who need to frequently carry laser engraving and engraving outside. The adjustment method of small fiber laser engraving machines is the same as that of ordinary machines, only requiring a laptop and a data cable to work.
1. Exquisite and elevated product quality. The processing accuracy can reach 0.01mm, ensuring that the effect of the same batch is more exquisite than traditional electrocorrosion, stamping, silk screen printing, and transfer printing. The lack of silk screen printing and transfer printing patterns that are prone to wear and tear can lead to unclear defects such as anti-counterfeiting and preservation. Non contact processing will not cause product deformation
2. Cost floor. Low scrap rate for mass production without the need for mold opening
3. Good efficiency. New products with multiple varieties and small batches can be obtained in a short period of time. Simply change the pattern on the computer to automatically skip numbers, making it a good choice for numbering and serial number marking.
4. There is no pollution caused by chemical substances, which exceeds the environmental protection requirements for export.
5. Meet special processing requirements and can process inner surfaces or inclined surfaces.
6. Low power consumption, the whole machine consumes about 500 watts of power and is powered once every two hours
7. Long lifespan, using fiber optic coupling to output photoelectric conversion up to 60%, according to the theoretical time of LD, it can be used for 100000 hours
86. The small fiber laser engraving machine is mainly used for laser engraving of metal materials and some non-metallic materials, such as ABS, PVC, PET and other engineering hard plastics.
9. The main industries of application include hardware accessories, electronic devices, jewelry, hardware tools, plastics, handicrafts, and other industries

Introduction to software functions of small fiber laser laser engraving machine

After sales and service of small fiber laser engraving machine

Delivery list for small fiber laser engraving machine: delivery note, laptop, laser metal adjustment plate, matching tool set, training service list.
Technical engineers provide on-site installation, debugging, and training on operating methods, lifetime technical support, lifetime free software upgrades, 2-hour after-sales response, and on-site processing within 24 hours