The evaporation process is scientific, reasonable, and energy-saving. The evaporator has a small amount of liquid and starts quickly. The solution flows down along the pipe wall without pressure drop or effective temperature difference loss caused by static liquid column. The evaporation temperature is low.

The evaporation process occurs at the interface between the liquid film and the secondary evaporation, rather than on the pipe wall, making it less prone to scaling and coking, with no dead corners. If crystalline particles are produced, they will also be washed down by the steam and flow into the bottom part of the empty space.

The concentration ratio is significant, and a high concentration effluent of 1.3-1.35 can be obtained, which can form a paste at once The evaporation rate is fast, ensuring that the matched extraction and filtered dilute liquid material are concentrated on the same day.

There is less foam generated in the falling film evaporation tube, and the secondary steam enters the separator along the tangent direction, separating the vapor and liquid under the centrifugal force, so the vapor carries less liquid, is not easy to run off, and the material recovery rate is high.

The product structure is reasonable and advanced, with external insulation structures for heaters, separators, and preheaters. singleEfficient concentration steam engineAll overcurrent components are made of 304 or 316L stainless steel, non-toxic and high-temperature resistant materials such as silicone rubber and plastic, to ensure that drug production meets GMP certification and food hygiene standards.

4、 Structural Details

Shanghai Kelao Machinery Sincerely Orders, Phone: 13587405718 QQ: 1371723230