Single cylinder Ubbelohde viscometer constant temperature water bathMain technical specifications and parameters
1. Working power supply: AC 220V ± 10%, 50Hz ± 5%.
2. Heating power: two levels, 1000W+600W.
3. Mixing motor: power 6W; speed 1200r/min.
4. Temperature measurement range: room temperature to 100 ℃.
5. Temperature control accuracy: ± 0.1 ℃.
6. Thermostatic bath: capacity, 20L; form, inner cylinder (single cylinder).
7. Usage environment: ambient temperature -10 ℃~+35 ℃, relative humidity<85%.
8. Temperature sensor: Industrial platinum resistance, with a division number of Pt100.
9. Power consumption of the whole machine: not exceeding 1800W.

precautions

1. Turn on the temperature control switch and mixer switch, and the instrument will start working.

2. The vertical state of the capillary viscometer can be adjusted by the three screws on the clamp.

3. When installing the thermometer, make sure that the position of the mercury ball is close to the horizontal plane of the center point of the capillary viscometer.

4The temperature controller belongs to the new generation of high-performance intelligent instruments, and the parameters are already set at the factory, so users do not need to reset them. When it is found that the temperature control accuracy cannot meet the requirements, you can follow the Press the 'Function' button for 5 seconds to enter the B menu for setting or modifying parameters (refer to the 'Temperature Controller User Manual' for details).

Single cylinder Ubbelohde viscometer constant temperature water bathPurpose and scope of application: The manufacturing of this instrument complies with the requirements specified in the industry standard SY/T5561 "Technical Conditions for Petroleum Product Kinematic Viscosity Testers" of the People's Republic of China.