Arrow Piercing Plankbaler(Side Strike)
The pallet is fed into the conveyor drum connected to the baler through a power transmission system, and the bales come to the front of the baler. When the light bar on the pressure plate used to detect the height of the bales senses the bales, the pallet stops conveying.
The on-site operators have pre-set the packaging program
Move the package to the packaging position
The side sensing pressure plate triggers the surface of the packaged item
The tape guide rod automatically passes through the gap in the middle of the pallet and seals the entire tape slot
strapBy running the automatic belt feeding device in the belt groove, when the packing belt contacts the closing device of the packing head, the packing machine will run the following steps: pulling the packing belt back, extending the packing belt, bonding the packing belt, and cutting the packing belt
Return the tape guide rod to its starting position
After the packaging is completed, the roller conveyor rotates again and returns to its original position. The packaged items are sent out of the packaging area and enter the power transmission system behind them
Ø Packing head: Hot melt welding type
Wearing speed: about 3.5 meters per second
Ø Tightening force of strapping: Hot melt welding type (German technology) 0-2000 Newtons, adjustable

Packaging frame size
Ø Height that can be passed: up to a maximum of 2000 millimeters
Ø Width that can be passed through: up to 1200 millimeters maximum
Ø Induction pressure plate length: 800 millimeters
Ø Driving method: driven by an infinitely variable speed motor
Power specifications
Operating voltage: 3/N/PE
Connection load: 380V, 50Hz
Ø Control voltage: 24V, DC
Ø Total power: 5KVA
Work efficiency: no less than 15 pallets per hour (two tracks)