Shimadzu GC-2010plus gas chromatographProduct Introduction:
GC-2010 Plus uses stable sensitivity detectors (FPD, FID, etc.) to obtain the expected trace level analysis results in experiments. In addition, the fast cooling speed of the column temperature box and flow path technology (such as blowback system) provide stable support for shortening analysis time and improving analysis efficiency.

Introduction:
1. The Shimadzu GCMS-QP2010 Plus gas chromatography-mass spectrometry analyzer is equipped with a large capacity dual inlet turbo molecular pump that provides an independent differential system for ion source and mass analyzer. The vacuum pumping speed is greater than 360L/s, achieving the expected vacuum degree.
2. The Shimadzu GCMS-QP2010 Plus gas chromatography-mass spectrometry FASST method enables the GCMS-QP2010 Plus to collect data by quickly switching between Scan and SIM measurements, and can simultaneously obtain chromatograms for both scanning and SIM methods.
3. The Shimadzu GCMS-QP2010 Plus gas chromatography-mass spectrometry (GCMS-QP2010 Plus) uses digital control technology with a scanning acquisition speed of 10000 amu/sec. Even sharp chromatograms can be stably collected without deformation of mass spectra or decrease in ion strength.
4. Adopting a metal molybdenum four stage rod type mass analyzer to enhance the stability of the mass analyzer performance. The stability of the instrument was achieved by minimizing the impact of ion contamination through pre-set rods.
5. GCMS-QP2010 Plus compound analysis expands the quality range to m/z 1090, suitable for high quality range determination (such as determination of polybrominated biphenyls).
6. Using the AART (Automatic Adjustment of Retention Time) function, the retention time of compounds can be corrected based on the retention number and measured values of n-alkanes, without worrying about changes in retention time caused by shortening the chromatographic column or using chromatographic columns with different batch numbers.
7. GCMS-QP2010 Plus Direct Injection (DI) method allows the sample to be directly introduced into the ion source of the mass spectrometer for ionization without going through gas chromatography, and the mass spectrum of the compound can be obtained without removing the gas chromatograph. The DI injection method is suitable for analyzing liquid, solid, or thermally unstable samples that cannot be vaporized in the gas phase.
The Compound Composer software integrates retention times, mass spectra, and working curves of nearly a thousand harmful chemicals, making it a stable assistant for users in environmental protection, daily food testing, and emergency response.
9. The rich Method Packahe method includes a complete set of solutions, including databases, to meet users' requirements for simultaneous qualitative and quantitative analysis of multi-component samples.
10. Various optional software such as headspace sampler control software, AOC 5000 control software, EPA software, etc. make GCMS-QP2010 Plus more scalable to meet different analysis requirements.
Shimadzu Corporation combined GPC with GCMS-QP2010 Plus to form the Prep-Q pesticide residue analysis device for food. This device further realizes analysis automation, completing simultaneous analysis of multiple components at once, with stable recovery rate, sensitivity, and reproducibility for pesticides, suitable for large-scale pesticide residue detection. Simultaneously using micro columns reduces the cost of solvent consumption and environmental pollution during instrument use.
Spectral Quality Analysis and Testing Technology (Shanghai) Co., Ltd
We provide a variety of analytical instruments, including liquid chromatography, gas chromatography, single quadrupole mass spectrometer, triple quadrupole mass spectrometer, ion hydrazine mass spectrometer, time-of-flight mass spectrometer, liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, atomic absorption spectrometer, plasma emission spectrometer, Fourier transform infrared spectrometer, life science instruments, nuclear magnetic resonance spectrometer, chromatographic consumables accessories, headspace sampler, gas chromatography/mass spectrometer, liquid chromatography/mass spectrometer, as well as Q/TOF, TSQ, LCT, ICP/MS, GC/MS and other combination instruments.
We operate imported instrument brands such as Agilent, Waters, Thermo, AB sciex, Perkin Elmer, Dionex, SHIMADZU, etc. to meet your different needs.