The J-shaped beam is composed of cold-formed steel plates with a "J-shaped" cross-section and embedded wooden beams, which are connected to each other by bolts. The J-shaped steel equipment is processed into different cross-sectional heights such as 80mm/100mm according to usage needs; Mainly used as the load-bearing keel for horizontal beam and slab formwork and vertical wall and column formwork, it can also be used as the primary and secondary beams for large canopies or temporary buildings.

Technical parameters of steel equipment:

1. Equipment installation dimensions: 9500mm × 1100mm × 1300mm

2. Host frame: 350H steel

3. Host shaft: 80mm diameter solid shaft

4. Roll material of tile press machine: 45 # steel surface plated with hard chromium, hardness HR55 ° -57 °

3. Host power: 7.5kw

6. Host power: 11KW

7. Cutting: Toothless saw cutting

8.16 Pressure relief type spindle (including 2 leveling channels)

9. Equipped with punching device

10. Molding speed: 8-10m/min

11. Total weight of equipment: approximately 4.5t

12. ：70mm

13. Hydraulic station pressure: 15Mpa

14. Electrical Control System: Industrial Computer PLC Variable Frequency Control

15. Plate thickness: 1.0-2 mm

The steel equipment mainly consists of a feeding rack, a feeding platform, a leveling device, a forming host, a hydraulic cutting machine, a hydraulic station, a punching part, a computer control cabinet, and other parts.

The finished product of the zigzag steel rolled by the zigzag steel machine has good bending and compression resistance, good flatness, high degree of automation, and easy installation.