Hebei Sanyang Shengye Fiberglass Group Co., Ltd
Home>Products>Selling YJT activated carbon fiber treatment organic waste gas recovery device
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    18831897799
  • Address
    No. 189 Fuqiang North Road, Zaoqiang County
Contact Now
Selling YJT activated carbon fiber treatment organic waste gas recovery device
Selling YJT activated carbon fiber treatment organic waste gas recovery device regeneration method: The carbon fiber filter cartridge can be regenerat
Product details

The product is a customized product, and the above quotation is a deposit

Working principle

It utilizes the advantages of highly efficient adsorbent materials - activated carbon fiber with strong adsorption capacity and fast adsorption and desorption speed - to purify the air and recover organic solvents.

Structure and Characteristics

This complete set of equipment mainly consists of: fan, air filter, purifier, switching valve, condenser, separator, etc. Using water vapor desorption. By switching the valve, the solvent can be dissolvedThe adsorption and desorption regeneration in two purifiers, the desorbed solvent and water vapor enter the condenser for condensation, and after separation by the separator, pure solvent can be obtained.

Main supporting equipment parameters

Concentration:500FPM-10000PPM

Quantity: greater than3000m3h

Solvent recovery rate: greater than95%

Operating temperature: Adsorption and desorption with water vapor at room temperature

Performance of carbon fiber

Activated carbon fiber is a new type of high-efficiency adsorbent material that has a high adsorption capacity for toxic and harmful gases, with fast adsorption and desorption rates. Carbon fiber is suitable for use in hot air(At 105 ℃, it can be desorbed and reused, and has corrosion resistance that is not afraid of acid and alkali. It has a significant purification effect on organic waste gases containing benzene derivatives, sulfur dioxide, carbon monoxide, nitrogen oxides, hydrogen sulfide, petroleum gas, odors, etc.

regeneration method

Carbon fiber filter cartridges can be regenerated by our company or by users themselves. After saturation, remove the carbon fiber felt tube and place it in a container, then heat it with steamAfter 10-15 minutes of drying, put it into the equipment and continue to use. The evaporated gas is condensed by a condenser, and the organic solution is separated by a storage separation tank. If the separated substance has no utilization value, it can be poured into a coal pile and burned.

Contact: Manager Yao mobile phone:18831897799

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!