1. The diameter of the mold includes 3mm, 5mm, 13mm, 16mm, 20mm, 25mm, 32mm, and 45mm, which can be used not only for infrared, but also for XRF and XRD.

2. Manual hydraulic presses of 15 tons and 25 tons can provide users with a fast, convenient, and relatively inexpensive method for pressing samples. The most common method is to use a 13mm pumpable mold to prepare 13mm potassium bromide (KBr) tablets and measure the solid infrared spectrum.

The maximum load of the 13mm mold is 10 tons, so a 15 ton hydraulic press is used; A larger mold can withstand greater loads, so a 25 ton hydraulic press is more suitable.

The pressure safety valve located below the pressure gauge can be set to "release pressure" when the set pressure is exceeded, so the maximum load of the hydraulic press can be set.

3. Atlas ™ Electric Press - Atlas Electric Press (T8 or T25) with 8 and 25 ton loads, simply press the button and the press will automatically load. The load of the press should be pre-set. Press the start button once.

Then press the release button again to release the pressure., This press is very useful when preparing a large number of sample pieces every day. When the current safety barrier is open, the power will automatically shut down. Only when the current safety barrier is closed, can the compressor apply load.

4. Mini hydraulic press (2 tons) The Specac mini hydraulic press is designed for use with 7mm molds, with a maximum pressure of 2 tons, and can produce high-quality KBr sample pieces for FTIR spectroscopic analysis. There is a pressure gauge on the body of the mini hydraulic press, which displays the actual pressure value when the pressure knob stops rotating.

Characteristics of Specac Mini Hydraulic Press:

●Maximum pressure: 2 tons - effortless;

●KBr chip diameter: 7mm - meets infrared testing requirements;

●During testing, KBr pieces are not demolded and can be directly tested - the operation is simple;

●Easy user maintenance - time-saving.

5. The maximum temperature of the thin film prototype is 300 ° C, and the thicknesses of the thin films are 15um, 25um, 50um, 100um, 250um, and 500um, respectively. The diameter of the sample is 29mm. Suitable for research on polymer materials and other thin film materials.

6. The maximum temperature of the high-temperature film prototype is 400 ℃, and the thicknesses of the films are 15um, 25um, 50um, 100um, 250um, and 500um, respectively. The diameter of the sample is 29mm, which is suitable for the research of special high-temperature resistant polymer materials.

For more infrared accessories and auxiliary equipment, please call Shanghai Lijing for detailed inquiries.