Salt pollution measuring instrument/salt pollution detector model: Elcometer 130

SCM400 Salt Pollution Measuring Instrument
Dip a special filter paper soaked in distilled water into it
Absorb saltwater on the surface. Elcometer
Measure the resistance of wet paper at 130, which can be calculated and displayed
Salt content, unit: ug/cm
2
.
Suitable for surfaces of various shapes and orientations
Coating.
• Fast measurement and easy to use.
Battery powered, easy to carry.
• Determine if the surface cleaning before coating is sufficient,
Helps prevent premature damage to the coating.
• Display the accumulation of salt on easily corroded surfaces, with
Helps to take effective measures to extend the lifespan of coatings
.
The test strip can be reused, and the test results are consistent
Compliant with ISO requirements.
• Accurate testing.
• Repeatability.
• Reproducibility.
Each set of instruments is packed in a lightweight portable case
Internally, including:
100 high-purity test strips.
250ml of purified water.
8 spare flat pallets.
8 PVC plastic bags.
Thin cotton paper.
Three 2ml syringes
Plastic tweezers.

Surface cleaning
Surface pollutants generated by salt, such as chlorides
Sulfates, nitrates, etc. can cause organic coatings
Bubbling, particularly prominent under soaking conditions.
Merely measuring the cleanliness of the substrate surface is not enough
of In the multi-layer coating process, during implementation
Before applying the next layer of coating, monitor and record the properties of each layer
Cleanliness is essential. If amine curing is used
Epoxy coatings, such as in low temperature and high humidity environments
Surface grease or exudate may cause coating
Loss of adhesion within the layer.

Range 0.1-20 μ g/cm
2

Resolution 0.1 μ g/cm
2

Accuracy ± 1%
Working temperature 5-40 ℃ (41-104 ℉) ＜ 80% RH
Power supply 9V battery 6LR61 (MN1604)
Sampling time 2 minutes
Paper size 11 cm circle or part of it
Weight 1.5kg (3.3 pounds)
Size (nominal) 200x190x60mm (7.9x7.5x2.4 ")
The number of battery measurements that can be tested is approximately 500
Model: Jig 130
The name of the instrument is the ISO 130 Salt Pollution Measuring Instrument
Part number E130--1

attachment
250ml purified water T
100 high-purity test strips T1304469-
Medical test paper (1 pack) T1304472-