The fully automatic four sided sealing packaging machine is a device that automatically cuts two rolls of packaging film, and after passing through the turning point of the equipment, the two rolls of film are combined and sealed. The product (mask) is transported between two rolls of packaging film by a conveyor belt, and then sealed left and right, which is prone to tearing and cracking. It is then sealed back and forth and cut before being transported out. The mask four side sealing packaging machine integrates bag making, product packaging, batch number printing, four side sealing, tearing, cutting, and finished product transportation, all completed in one go. The whole machine adopts a human-machine interface, with accurate and stable bag making length, automatic left and right correction, front and rear photoelectric alignment, six sets of temperature control, and free film setting.

Sealing performance:
For tablet products such as cream, antipyretic cream, disposable masks, especially warm babies, the four sided sealing packaging machine requires high air tightness. The sealing is divided into indirect thermal sealing and direct thermal sealing. The entire surface of the indirect thermal seal can be uniformly and fully sealed, without any leakage points that may cause gas to enter or exit. This type of seal is not only aesthetically pleasing, but also has good sealing performance. The direct thermal sealing contact is uneven and prone to leakage, but this type of equipment has a fast preheating speed and relatively low heating temperature.

This new generationfour-side sealThe packaging machine system adopts a maintenance control dedicated controller, a maintenance control touch screen, and4Implement it with a servo system.
This system is suitable for the following models depending on the feeding method.
Equipment power supplyAC220V 50HZ normal grounding

The feeding shaft is a standard model with a chain and push plate.(Using hot-melt adhesive to cover dialysis paper film)0.018PEperhapsPET）
four-side sealpackerThe main characteristics are:
1. Knife movement: adaptive cam curve, smooth acceleration and deceleration during movement, minimal mechanical vibration.
2. Packaging range: There is no upper limit or lower limit for packaging lengthcauseThe cutter'sRotating shaft diameterdecision.
3. Standard mode: 1. Power on without resetting, run directly, easy to operate(Fault shutdown requires reset).

2.Production speed dual channel bag length setting200MMof When the speed can reach80about

3. Automatic film bonding, in the case of double film, it can automatically bond without stopping the machine.

4.Regarding the printing layoutAutomatically track the position of the color code.