VIP member
Product details
[Technical Parameters]:
| model | Production capacity (kgh) | Spindle speed (min) | Incoming inspection degree (mm) | Grinding fineness (mesh) | Motor power (kw) | Weight (kg) | Dimensions (length * width * height) (mm) |
| 20B | 60-150 | 4500 | 6 | 60-150 | 4 | 250 | 550×600×1250 |
| 30B | 100-300 | 3800 | 10 | 60-120 | 5.5 | 320 | 600×700×1450 |
| 40B | 160-800 | 3400 | 12 | 60-120 | 7.5 | 550 | 800×900×1550 |
| 60B | 500-1500 | 2800 | 15 | 60-120 | 11 | 680 | 1000×900×1680 |
[Main purpose]:
This machine is mainly used for weak electrical substances and high temperature resistant substances such as chemical, pharmaceutical (traditional Chinese medicine), food, fragrance, resin powder, coating powder, etc.
[Working principle]:
This unit utilizes the relative motion between the movable toothed disc and the fixed toothed disc to crush the material through the impact, friction, and mutual impact of the toothed disc. The crushed material is automatically collected in a bag by the action of centrifugal force, and the dust is filtered and recovered through a bag filter in a vacuum cleaner. The machine is designed according to the GMP standard and is entirely made of stainless steel material, with no dust flying during the production process. And it can improve the utilization rate of materials and reduce enterprise costs.
After material crushing:
[Service Commitment]:
Design and production
Our company extensively solicits opinions from the demand side during the design and production stages of equipment processing, especially in the layout of flat and vertical surfaces, fully considering the site conditions and public engineering conditions of the demand side, so as to ensure the quality of the equipment while optimizing the combination.
Installation and commissioning
When the equipment arrives at the buyer's factory, our company will send dedicated technical personnel to guide the installation and be responsible for debugging to normal use.
training
Before the equipment is used normally by the demand side, our company's debugging personnel will organize training for relevant personnel of the demand side. The training content includes equipment maintenance, upkeep, timely repair of common faults, and operating procedures for the equipment.
quality assurance
Our company's equipment warranty period is one year. During the warranty period, if the equipment is damaged due to non-human factors, we are responsible for free maintenance. If the equipment is damaged due to human factors, our company will promptly repair it and charge a cost fee.
Maintenance and Deadline
Equipment damage that occurs upon expiration of the warranty period shall be repaired on site within two days by enterprises within the province and within four days by enterprises outside the province upon receiving notification from the purchaser. The services provided upon expiration of the warranty period are paid services, and a production fee shall be charged for each service.
Service Commitment
Our company promises to provide lifelong guidance, maintenance, and service for all equipment.
[Safety precautions for use]:
1. Before use, check whether all fasteners of the machine are tightened and whether the belt is tensioned.
2. The direction of spindle operation must conform to the arrow direction indicated on the protective cover, otherwise it will damage the machine and may cause personal injury.
3. Check if the electrical appliances are complete.
4. Check if there are any hard objects such as metal in the crushing room of the machine, otherwise it may damage the cutting tools and affect the operation of the machine.
5. Before crushing, the purity of the material must be checked, and no metal or hard impurities are allowed to mix in, in order to avoid damaging the cutting tool or causing accidents such as combustion.
6. The oil cup on the machine should be regularly filled with lubricating oil to ensure normal operation of the machine.
7. Stop adding materials before stopping the machine. If not in use, remove any remaining debris inside the machine.
8. Regularly check whether the cutting tools and mesh are damaged, and replace them immediately if they are damaged.
9. There may be slight vibrations during use, so be sure to tighten the handle connecting the hood to avoid accidents.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-