The root and stem peeling vegetable washing machine is suitable for central kitchens, group meals, large enterprises, military units, government offices, school canteens, vegetable and side dish centers, food processing plants and other places. This machine is made of all stainless steel and has a luxurious appearance. It imitates manual brushing of vegetables with a brush, and is equipped with water spray and rinsing in different directions. It adopts a slag basket and centralized sewage structure to avoid pipe blockage. Potatoes, carrots, taro, onions, sweet potatoes and other vegetables can be cleaned and peeled without damaging them, and can be directly cut and prepared. It is an automatic cleaning and peeling machine that replaces manual labor. Water and energy conservation, labor-saving, convenient and fast use, can meet the production needs of a wide range of users.

Structural composition

This machine is made of stainless steel and mainly consists of a stainless steel vegetable sink, stainless steel frame, stainless steel slag basket, imported nylon brush, flipping device, filtering device, and water supply part.

Working principle

The machine consists of two stainless steel washing tanks, a slag separator, an air supply and exhaust system, a vortex air pump, a filtering device, and a water supply section. In the process of cleaning and peeling, root vegetables are placed in a hopper surrounded by multiple rolling brush rollers. The brushes are driven by a motor to rotate, and water is sprayed and cleaned from different directions above the vegetables. The root and stem vegetable washing machine has the advantages of clean cleaning and peeling, high yield, high efficiency, hygiene, beauty, and durability.

product name	productmodel	External dimensions
Root and stem peeling vegetable washing machine	HYTW-1500	2100*760*1100mm
production capacity	power	Water inlet interface
600-1000kg/h	0.75kw/220v	DN25
Drainage interface	Exit height
DN40	570

install Check before startup 1. After unpacking, use a forklift to transport the machine to the work location. 2. Confirm that the power supply is 220V. 3. Adjust the four foot screws of the machine smoothly. 4. Check if the appearance has been damaged due to transportation. 5. Check the direction of the brush after connecting the power supply. 6. Connect the water spray pipe. Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

Operation usage 1. Place the machine steadily and ensure that it does not shake. 2. Check whether the screws in various parts of the machine are loose or missing. 3. Connect the power supply and confirm that it is 220V 4. Check whether the water supply and drainage are complete, ensure smooth drainage, and install corresponding short-circuit protection and overload protection devices on the power supply line. 5. After turning on the power, check if the brush direction is correct (from the discharge port, the brush roller should be turned clockwise as correct) 6. Connect the water spray flushing pipe. 7. After washing, the material can be returned by opening the return port without stopping the machine. 8. Turn off the power after the cleaning work is completed.

1. The machine should be placed in a stable location.

2. Do not insert your hands into the machine while it is in operation.

3. After using the machine, please make sure to cut off the power before cleaning it.

4. If there is any abnormal noise during machine operation, the power should be immediately turned off and the fault should be eliminated before continuing to operate.

Maintenance

1. After each use of the machine to complete work, turn off the power and clean the machine.

2. Regularly lubricate or replace bearings and reducers that have been cleaned and peeled

Lubricating oil.

3. If there are damaged parts such as shafts, belts, brush rollers, etc., they should be replaced immediately.