Working principle:

The principle of low boiling point of water under negative pressure is used to remove moisture from wood at low temperatures and dry the wood. Then, under atmospheric pressure, wax is injected into the interior of the rosewood to block the passage of water in and out, achieving a stable effect on rosewood furniture and crafts. It has the characteristics of short processing time and high dehydration uniformity, which can save 1/2 of the time compared to conventional drying. The moisture content of the wood can reach less than 6%. It adopts electric heating (if the demand has steam heat source and thermal oil heat source, they can also be used), high degree of automation, and reduces manual management costs. It is an ideal product for processing high-end mahogany furniture.

Equipment features:

1. The equipment can use different solvents such as microcrystalline wax, paraffin wax, emulsified wax, flame retardants, preservatives, dyes, etc,.

2. It can achieve the effects of wood waxing, deep immersion waxing, color changing, anti-corrosion, flame retardant, etc., truly versatile with one machine.

3. Heating uses electrical energy, immersion depth can be controlled, fully automatic operation, safe and environmentally friendly.

4. Can meet the production needs of seamless rosewood furniture

Main features of the product:

1. The fuel required for combustion includes sawdust, crushed wood, coal, etc.
2. Adopting a unique steam generation device to ensure sufficient steam supply to the drying kiln, during the initial drying stage, a large amount of steam enters the room, increasing indoor humidity to prevent wood deformation and cracking.
3. Dried wood has a short drying cycle, low cost, uniform drying, and good effect, which solves the problems of internal cracking, fracture, surface cracking, deformation, killing of insect eggs in the wood, and discoloration of the wood during the drying process.
4. It can be designed as one furnace with two drying rooms to facilitate rotating operations according to requirements.
5. Technological transformation can be carried out in combination with the existing soil kiln to save equipment investment.
6. The overall equipment is easy to operate, safe and reliable.
7. This equipment is suitable for drying various types of wood and is an ideal replacement for furniture factories, wood product factories, traditional drying kilns, and old drying equipment.

In addition, there are:
1. Good drying effect, with a yield rate of over 99%, and the moisture content of the dried wood can meet any requirements.
2. The powerful sprinkler system equipped enables the wood to achieve the effect of hot steaming, and the moisture in the wood is gradually drained from the inside out. After drying, the wood will not deform, crack internally, or crack at the ends.
3. The setting of the hot air recovery system accelerates the operation speed of the airflow in the drying room, increases the drying time, and improves the utilization of heat energy.
4. The combustion chamber and drying room are completely separated and operate separately, with clean hot air leading to the drying room, so there will be no fire, let alone discoloration or degradation of wood.
5. Low operating costs, wide range of fuels, and the use of wood scraps such as shavings and sawdust, as well as coal.

The wood wax boiling technique is to put the wood after cutting into wax and boil it. The wood being boiled must be completely soaked in wax. During the boiling process, the wax will extract water and some oil from the wood, and the wax will gradually penetrate into the interior of the wood from its pores. Boiling the wood in this way not only achieves the effect of drying, but also further shapes the wood so that it will not deform under most conditions.

Currently, there are three ways to apply wax boiling technology. The first approach is to consider it as the most important process and directly replace traditional drying methods; The second method is to use it as an auxiliary process for traditional drying methods, combining traditional drying with wood wax boiling drying to achieve better drying results; The third method is to boil the pre made rough furniture with wax to achieve a dual effect of drying and waxing.

explain:

The product price is for reference only. Please call us for details!