QL-010 Ozone Aging Test EquipmentIt can be used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation sheaths, etc. Under static tension or continuous dynamic tension deformation, or under intermittent dynamic tension and alternating static tension deformation, exposed to sealed and unlit air containing a constant ozone concentration and a constant temperature test chamber, the sample is tested at a predetermined time to evaluate the ozone aging resistance of the rubber by detecting the degree of cracking or other performance changes that occur on the surface of the sample.

QL-010 Ozone Aging Test Equipmentreference standard
GB/T 13642-92 Vulcanized rubber - Ozone aging resistance test - Dynamic tensile test method;
GB/T 7762-2003 Rubber, vulcanized or thermoplastic - Static tensile test method for resistance to ozone cracking;
GB/T 2951.10-1997 General Test Methods for Insulation and Sheath Materials of Cables;

2、 Heating, humidification, and dehumidification system:
A、 Heating system: using far-infrared nickel alloy high-speed heating electric heater
B、 Humidification system: built-in boiler steam humidifier; Equipped with automatic water level compensation and water shortage alarm system

3、 Refrigeration system: Compressor: 1 set of fully enclosed French Taikang

4、 Circuit control system: adopts a "4.3-inch" imported color LCD touch screen controller

5、 Ozone system:
1. The main component of the ozone generator is a silent discharge tube ozone generator (with the characteristics of small noise volume and high purity) with an output control accuracy of ± 10% for 4-20mA
2. Electrode cooling method: air cooling
3. Ozone generation gas source: direct air
4. The ozone detection probe consists of an imported CT electrochemical sensor, housing, electronic circuit board, shielded wire, etc
5. Ozone detection probe output signal: 4-20mA
6. Ozone detection probe collection accuracy: ≤± 5% F.S

6、 Product packaging: Wooden box

7、 Product transportation: Freight

8、 Payment method: 50% of the payment shall be made in advance, and the remaining balance shall be paid in full after the goods are inspected and accepted.

9、 After sales service: free home delivery, available on requestOzone aging test equipmentAfter installation and debugging are completed, relevant technical personnel will receive free basic operation training at the user's site, with no limit on the number of people

*Equipment usage conditions:
1. Environmental temperature: 5 ℃~+28 ℃ (average temperature within 24 hours ≤ 28 ℃)
2. Environmental humidity: ≤ 85%;
3. The machine should be placed 80 centimeters in front, back, left, and right, and no objects should be placed;