Overview of Q-100A Fully Automatic Sample Cutting Machine:

The Q-100A cutting machine is composed of a body, an electrical control box, a cutting chamber, a motor, a cooling system, cutting grinding wheels, and other components. This cutting machine can not only cut circular workpieces with a diameter of less than 100mm, but also cut rectangular specimens with a height of 100mm and a depth of less than 200mm.

　　working principle:

The machine cools the sample through a cooling system to prevent overheating and tissue burning during the cutting process. This machine can also set the cutting speed for cutting different samples, thereby improving the quality of the cut samples. The machine has manual cutting and automatic cutting. A large volume cutting chamber is more convenient for cutters to use and is one of the essential sample preparation equipment for metallographic testing in colleges, universities, factories, and enterprises.

　　Technical indicators:

Power supply: three-phase four wire (380v, 50Hz)
◇ Spindle speed: 2100 revolutions per minute
◇ Grinding wheel specifications: 350mm × 2.5mm × 32mm
◇ Maximum cutting capacity: φ 100mm
Note: The cutting ability mentioned here refers to the design cutting ability of the new cutting wheel, and the actual cutting ability depends on the sample material, grinding wheel, and clamping technology.
◇ Maximum cutting volume: 100mm × 200mm
Motor: YS90L2-2 3KW
Cutting table size: 310 × 280mm
◇ Dimensions: 930 × 990 × 1230mm

-------------------------------------------------------------------------------------------------
　　Extended reading:

　　Judgment of the Quality of Metallographic Cutting Machines
1. There is no over burning phenomenon in the incision. Require the metallographic cutting machine to maintain a temperature below 150 degrees Celsius during the cutting process.
2. The cutting surface of the sample is smooth and flat, with high perpendicularity between the cut surface and the longitudinal axis.
3. The cutting machine grinding wheel has strong adaptability and can cut both soft and hard metals.
4. The sample is cut to an appropriate size and the dimensions are accurate.
5. Fast cutting speed, simple and convenient operation.