Double cone rotary vacuum dryer is a new type of dryer that integrates mixing and dryingDrying machine. Combine the condenser, vacuum pump, and dryer to form a vacuum drying device. If solvent recovery is not required, the condenser can be omitted. This machine is designed with advanced technology,The internal structure is simple, easy to clean, and all materials can be discharged, Easy to operate,Can reduce labor intensity and improve working environment. At the same time, due to the rotation of the container itself, the material also rotates but there is no material accumulation on the wall, resulting in a high heat transfer coefficient and a high drying rate,Not only does it save energy, but the material dries evenly and thoroughly, with good quality. Widely applicableUsed for drying materials in industries such as pharmaceuticals, chemicals, food, dyes, etc. Compliant with GMP requirements

When oil is heated, automatic constant temperature control is used to dry biochemical products and mineral raw materials. The temperature can be between 20-160 ℃ and within ± 2 ℃.

- High thermal efficiency, more than twice as high as a typical oven.

Indirect heating ensures that the material is not contaminated and meets the requirements of GMP. Equipment maintenanceEasy to operate and clean.

This machine is suitable for powder and granular materials in industries such as pharmaceuticals, food, and chemicalsVacuum drying and mixing, especially suitable for materials with the following requirements;

- Heat sensitive materials that cannot withstand high temperatures;

- Materials that are prone to oxidation and pose a danger;

- Materials that require the recovery of solvents and toxic gases;

- Require materials with extremely low residual volatile matter content;

- Require thorough and uniform mixing of materials;

The SZG double cone rotary vacuum dryer is a double cone rotary tank body, inside whichIn a vacuum state, steam or hot water is introduced into the jacket for heating, generating heatContact with wet material through the inner wall of the tank. The water vapor evaporated from wet materials after absorbing heat,It is extracted through a vacuum pump and a vacuum exhaust pipe. Due to the vacuum state inside the tank and the continuous flipping of the material up and down, inside and outside caused by the rotation of the tank, the drying speed of the material is accelerated, the drying efficiency is improved, and the goal of uniform drying is achieved.

Process flowchart: