VIP member
Power video 2-in-1 monitoring dedicated lightning arrester
Comprehensive protection for camera power supply and video signal, with minimal interference; High traffic volume and low residual pressure; Multi lev
Product details
basic descriptionBasic description-Heavenly Shield-
The power video 2-in-1 monitoring dedicated lightning protection device is a customized lightning protection product for analog video signal cameras, which protects the camera power and video lines from the effects of lightning electromagnetic pulses, induced overvoltages, and operational overvoltages. It is widely used in public security, traffic monitoring, and other fields. This series of products has the characteristics of high integration, low insertion loss, low residual voltage, and easy installation, and has good lightning protection effect.
Application scenariosApplication scene-Heavenly Shield-
-
-
01Used for the protection of monitoring equipment (power supply, camera) in the monitoring system;
02Used for bank monitoring system
03Community security system
04Monitoring equipment for schools, enterprises, road safety protection, etc
Technical Parametertechnical parameter-Heavenly Shield-
|
model |
power supply |
M10-12/D12BM |
M10-24/D12BM |
M10-220/D12BM |
|
Video section |
||||
|
Working voltage |
12V |
|||
|
Nominal discharge currentIn |
3kA（8/20μs） |
|||
|
Maximum flow capacityImax |
5kA（8/20μs） |
|||
|
response timeTa |
1ns |
|||
|
insertion lossAe |
0.5dB |
|||
|
Joint form |
BNC |
|||
|
Power supply section |
||||
|
Working voltage（Un） |
12VDC |
24VAC |
220VAC |
|
|
Nominal discharge current（In） |
5kA（8/20μs） |
|||
|
Maximum flow capacity（Imax） |
10kA（8/20μs） |
|||
|
Protection level (in, 8/20 μ s)Up |
60V |
100V |
900V |
|
|
Joint form |
Crimping type |
|||
|
Dimensions (excluding grounding wire) |
112*60*25mm |
|||
|
Protection level |
IP20 |
|||
installation diagraminstallation diagram-Heavenly Shield-
-
1. Prepare one power cable, one pan tilt signal cable/video cable/network cable respectively, for connecting the lightning arrester and the camera
2. Fix the lightning arrester inside the waterproof box
3. Complete the connection between the lightning arrester power supply, signal output port, and camera
4. Connect the power supply and signal input ports of the lightning arrester to the monitoring center or optical transceiver
Power+Video: M10-12/D12BM M10-24/D12BM M10-220/D12BM
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-