Product Introduction

1、 Product Introduction

Portable kinematic viscometer-MiniVisc-3050Users can easily detect viscosity changes caused by oil aging, external pollution, or mixed oil pollution. Its split cell allows users to accurately analyze the kinematic viscosity of oil on site, without the need for solvents, resulting in less waste and being more environmentally friendly.

IIPortable kinematic viscometerProduct Features

1. Simple multilingual interface, touch design, Chinese operation, dedicated sampling gun, no solvent required, guided operation process.
2. Easy to carry, lithium battery charging, with a battery life of over 6 hours, low oil sample consumption, minimal consumables required, lightweight, and can be equipped with a dedicated transport box.
3. High precision, nominal repeatability: 3%, provides viscosity standard solution, wide detection range, supports customer self calibration, and automatically calculates high-temperature kinematic viscosity.

3、 Working principle

1. After the two panels of the open and closed loading cell are closed, a "capillary tube" is formed;
2During the measurement process, the oil remains vertically along the "capillary tube";
3The flow rate of oil is related to its viscosity and gravity;
4The viscosity of the oil is directly proportional to the flow rate of the oil;
5The panel is equipped with a high-precision infrared sensor (for measuring oil flow rate).

4、 Main technical parameters

（1） Product application:

1. Application scope: Mineral or synthetic lubricants, coolant, ethylene glycol, and Newtonian fluid output results within the measurement range, including kinematic viscosity (cSt, at 40 ° C), can be usedAutomatically calculate the kinematic viscosity at 100 ℃;
2Standards used: ASTM D7279, D445 (revised);
3Measurement range: 1-700mm2/s (cSt, under 40 ° C conditions);
4Accuracy: ≤ 3% of measured value (after calibration);
5Repetition accuracy: ≤ 3% of measured values (typical);
6Temperature control accuracy: ± 0.1 ° C;
7Calibration: No need.

（2） Using parameters

1. Injection volume: 60 μ L (approximately 1-2 drops);
2Solvent/reagent: No need;
3Working temperature: 0-40 ℃;
4Working humidity: 10-80%, no condensation;
5Working altitude: ≤ 5000 meters.

（3） Power parameters

1. Battery: The power supply is equipped with a built-in rechargeable lithium-ion battery;
2Power: AC 240V, 500Hz, 10W；
3Typical working hours: 6-8 hours;
4Charging time approximately: 2.5 hours;

（4） User interface parameters

1. Display: Color touch screen display;
2Data transfer: USB (used during software updates);
3Data input: touch screen;
4System languages: Chinese and English.

（5） Mechanical parameters

1. Dimensions: 152mm (height) x 127mm (width) x 203mm (length);
2Weight: Approximately 1.8 kilograms;
3Outer packaging dimensions: 7.9cm (height) x 6.3cm (width) x 5.5cm (length).

（6） Consumables

1PV1012: 60 μ L disposable straw and soft cleaning paper, 100 sets/pack;
2P-11052: 60 μ L disposable straws, 500 pieces/pack;
3PV1011： Disposable soft cleaning paper, 500 sheets/pack;
4PV1019： Viscosity verification standard oil.