Photoelectric sludge concentration meter-Global supplier

First Floor, Building A4, Kingdee Software Park, No. 532 Zhongshan East Road, Qinhuai District, Nanjing City

product overview

The photoelectric sludge concentration meter is an online monitoring instrument designed to measure the concentration of suspended solids in municipal and industrial wastewater treatment processes. Can be applied to detect changes in activated sludge concentration during biochemical treatment processes, providing continuous and accurate measurement results. By adopting innovative multi beam mutual compensation technology, measurement errors caused by sensor window contamination can be eliminated, significantly improving measurement accuracy, reducing maintenance workload, and enhancing work reliability. It is particularly suitable for harsh working conditions in the field of sewage treatment.

working principle

The light waves emitted by the sensor transmitter are absorbed, reflected, and scattered by the measured object during transmission, and only a small portion of the light can reach the receiver. The transmittance of the transmitted light is proportional to the concentration of the suspended object being measured, and the concentration of the suspended object is calculated by measuring the transmittance of the transmitted light.

technical specifications

Measurement range: 0-100g/L

Measurement units: g/L, mg/L, and NTU (optional)

Accuracy: ± 1.0% FS

Resolution: 1mg/L

Calibration:Standard liquid calibration or on-site comparative verification

Display: LCDlcd

Analog output: 4-20mA (four wire system), maximumlargeload750Ω

Switching quantity: 2 sets of relays with a capacity of AC230V/5A

Digital interface:RS485 (Modbus protocol)

Power supply: AC220V ± 10%, DC24V ± 10%

texture of material:

Transmitter: ABS

Sensor: Shell made of 316L stainless steel

Transmitting and receiving column PP

connectprocessG1 pipe thread

Installation method:

Bracket input typeCard insertion or ball valve insertionFlanged pipe section type

Cable length: 10m (extendable)

Protection level:

Transmitter:IP65

electricity Extreme:IP68

Working temperature:

Transmitter:-20～55℃

Sensor:0～60℃

Environmental humidity: Relative humidity ≤ 85%

working pressure:normal atmospheric temperature≤0.3MPa

Photoelectric sludge concentration meter transmitter

Photoelectric sludge concentration meter sensor

Product Features

Multi beam RD measurement technology compensates for the effects of ambient light, fouling, and component aging;
Multi point calibration ensures accuracy within a wide measurement range;
Output of various variables such as current, relay, RS485, and intelligent control of the system;
The sensor can be equipped with a blowing device, which is controlled by a transmitter to perform self-cleaning;
Digital sensors have strong anti-interference ability;
There are various installation methods such as immersion, insertion, and pipe section.

application area

Measurement of suspended solids at the inlet and outlet of sewage treatment plants and sedimentation tanks.
The sewage treatment plant controls the measurement of sludge concentration in the aeration tank, evaluates the quality of activated sludge, or the entire biological treatment process.

Product manual: Instruction manual for photoelectric sludge concentration meter（ Online download)