BH500Stainless steel petroleum samplerusage

Place the petroleum sampler in water with a handheld lifting chain (with the stopper closed), reach the depth, pull up the zipper of the stopper, and the bottle stopper opens. The water sample enters the sampling bottle through the injection port of the PTFE bottle stopper cover, and bubbles will emerge during injection. When there are no bubbles, release the zipper of the stopper, close the bottle stopper, and remove the sampler to complete one sampling task.

Sampling bottle specification: 500ml wide mouth glass bottle

BH500Stainless steel petroleum samplerIntroduction:

Compliant with the requirements of the "Technical Specifications for Monitoring Surface Water and Wastewater" (HJ/T91-2001), "Determination of Petroleum in Water Quality by UV spectrophotometry" (HJ 970-2018), and "Determination of Petroleum and Animal Oils in Water Quality by Infrared spectrophotometry", it is used to collect petroleum samples from rivers, lakes, and reservoirs.

Collecting water samples from oceans, lakes, and rivers, equipped with floating balls for oil content analysis, and can also collect water samples for routine analysis. It is an indispensable equipment for investigating water pollution status. It is one of the water collection devices specified by the National Marine Pollution Monitoring Network and also one of the standard water collection devices specified for use in the secondary marine pollution baseline survey.

Sampler size: The height can be adjusted according to the different heights of the infrared and ultraviolet bottles, with 2 height adjustment levels.

Technical Parameter

Water bottle: made of glass material, 1000mL/500ML;

Protective cover: stainless steel;

Depth of use: 0.5-1 meter underwater;

Operating temperature:- 2℃～+40℃；

Water intake time: ≤ 1 minute.

Chain and plug zipper length ≥ 3 meters