VIP member
Parabolic radar level gauge
A parabolic antenna consists of a reflector and a feed source located at its focal point, forming an axisymmetric parabolic structure antenna. The mai
Product details
A parabolic antenna consists of a reflector and a feed source located at its focal point, forming an axisymmetric parabolic structure antenna. The main advantage of a parabolic radar level gauge is its high directionality, similar to a searchlight or flashlight, which converges microwaves in a specific direction into a narrow beam. Meister is committed to building the most professional parabolic radar level gauge manufacturer in China. Meister Instruments specializes in producing parabolic radar level gauges, and every parabolic radar level gauge is meticulously crafted to provide you with the highest quality products and services.
Overview of parabolic radar level gauge products
Due to the narrow beam width and directionality that parabolic radar level gauges can generate, they can measure well when there are many interferences inside the tank wall, without being affected by false echoes from interferences such as stairs. Suitable for measuring large range, high dust, high temperature, and low dielectric constant media in the cement, power, and steel industries.
Precautions for parabolic radar level gauge
1. The measurement range starts from the point where the beam touches the bottom of the tank, but in special cases, if the tank bottom is concave or conical, measurement cannot be carried out when the level is below this point.
2. If the medium has a low dielectric constant when it is at a low liquid level.
3. In theory, it is possible to measure the position reaching the tip of the antenna, but considering the effects of corrosion and adhesion, the final value of the measurement range should be at least 100mm away from the tip of the antenna.
4. For overflow protection, a safe distance can be defined to be added to the blind spot.
5. The minimum measurement range is related to the antenna.
The measurement range starts from the point where the beam touches the bottom of the tank, but in special cases, if the tank bottom is concave or conical, measurement cannot be carried out when the level is below this point. If the medium has a low dielectric constant, the bottom of the tank will be visible when it is at a low liquid level. To ensure measurement accuracy, it is recommended to set the zero point at a low height of C. For overflow protection, a safe distance can be defined to be added to the blind spot. The minimum measurement range is related to the antenna.
Installation requirements for parabolic radar level gauge:
1. Try not to install it in the center of the jar.
2. At a distance of 1/6 of the tank diameter from the tank wall, the minimum distance is 200mm.
3. It cannot be installed above the feeding port.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-