Product Introduction: The PSD type flat hanging bag centrifuge is an improved model based on the SD type three legged hanging bag centrifuge. Its driving motor can be started by a clutch or controlled by a variable frequency speed regulation system, ensuring a smooth start. The power is transmitted to the drum through a V-belt, which drives the drum to rotate at high speed along its own axis, forming a centrifugal force field. The material to be separated enters the high-speed rotating drum through the upper feeding pipe and is subjected to the centrifugal force field The material is evenly distributed on the drum wall for centrifugation process The liquid phase passes through the gaps between the solid material and the filter bag Shake through the drum hole to the empty chamber of the casing Drain from the chassis outlet. The solid material is trapped in the centrifuge filter bag. After stopping the machine, open the machine cover (with the help of a specially designed balance assist device) and pull out the blue cover locking bolt. Use a specially designed lifting device to lift the filter cake out of the designated location outside the machine and unload it, completing one work cycle. The hood is equipped with a washing tube that can wash materials.

Basic accessory structure:
1. Cylindrical structure, with the shell and chassis welded together as a whole.
2. Configure frequency conversion control cabinet.
3. The drum is made of ductile iron wrapped in stainless steel.
4. Set up exhaust ports, nitrogen filling ports, and other structural requirements according to user requirements.

User parameter selection:
Loading capacity (loading limit)
Drum speed (maximum separation factor)
Material selection:
Due to the need for anti-corrosion, other materials can be used according to customer requirements: SUS316316L.321.304. Titanium material, Hastelloy alloy, lining plastic, lining rubber, sprayed F-46.