_{Product Introduction:
^{Our company's storage tanks and tanks made of PP material are mainly suitable for chemical, petroleum, pharmaceutical, food, oil and fat, printing and dyeing, and metallurgy industriesStorage and temporary storage of materials in industries such as gold, environmental protection, and light industry production. The steel structure of this equipment is divided into two types: vertical and horizontalAmong them, the upright type is divided into ear hanging type, leg standing type, and flat bottom standing type. Due to its performance in many aspects under the same usage conditionsBetter than storage tanks made of other materials; Therefore, it has been widely used in industrial production in the above-mentioned industries.}}

<sub>Performance characteristics:
1. Operating pressure: atmospheric pressure;
2. Operating temperature:- 10℃~120℃；
3. Strong corrosion resistance, easy operation, and long service life;
4. Lightweight: It is relatively convenient for the transportation, installation, and maintenance of the equipment;</sub>

<sub>Ordering instructions:
When placing an order, please refer to the performance characteristics in the product manual and select the spare according to the medium and usage conditions;
If you need our company to design on your behalf, the user must provide detailed parameters;
3. If it is necessary to change the size and orientation of the pipe interface, it should be proposed in advance for on-demand manufacturing;
4. Our company can also manufacture according to the equipment drawings provided by the user.</sub>

<sub>matters needing attention:
Due to the fact that the material of this equipment is PP plastic, which is relatively brittle, it is strictly prohibited to collide or squeeze heavy objects during transportation that may damage the equipmentTo handle with care, lift and place gently when in place, and slowly tighten the bolts of each component during installation to avoid damaging the equipment;
2. Avoid contact with open flames;
3. Before putting into use, water should be poured to test for leaks, and the cylinder and pipe interface should be observed for any leaks or misconnections. If there are no abnormalities observedPut it back into production use under certain circumstances.</sub>