Equipment features:

PP Chemical Foam Board Production LineIt is a new type of PP chemical foam board production line exclusively developed and researched by our company.The PP foam board/sheet produced by this production line with a reasonable raw material formula process hasExcellent thermal stability (maximum operating temperature up to)120%) and high temperature productsThe dimensional stability,Suitable and smoothThe surface, excellent microwave adaptability, degradability, and excellent processability of this production line have greatly surpassed similar products.

Advanced applications developed by ZeqiPPNon crosslinked foaming technology,PPThe foam layer has uniform and delicate pores, a smooth surface, or clear patterns and textures. product density0.45-0.6g/cm3, thickness0.6-15mm,width of cloth600-1600mm，PPFoam sheets and boards are widely used in industries such as stationery, automotive interiors, luggage linings, turnover boxes, food packaging containers, and building templates.

PP foam board has the following characteristics:

(1)Excellent heat resistance;

(2) Excellent mechanical properties. Its mechanical properties such as tensile strength and tear strength are at the highest level of foam plastics;Its compressive strength is lower than that of hard PURAnd foam PSBut higher than soft PUR, it has moderate compressive strength;

(3) Significant thermal insulation. Foamed PPFoam PEBoth are closed cell structures, therefore, their thermal conductivity is notAffected by moistureinfluence. Due to its lower thermal conductivity compared to foamed PE and significant insulation properties, it can be usedMake advanced insulation materials;

(4) Good resilience and high impact absorption capacity;

(5) Chemical corrosion resistance is better than all other foam plastics; Resistant to edible oil, meeting the needs of greasy food packaging;

(6) Good stress cracking resistance;

(7) Foam PSCompared to that, there is no release of toxic gas during combustion;

(8) Recyclable and renewable;

(9) The degradation performance is significantly better than that of foamed PSAnd foam PE.

Zeqi has mature three-layer, double-layer, and single-layer co extrusion foaming technology to provide customers with complete solutions. The standard product technical parameters are as follows:

Note: Technical parameters are subject to change without prior notice.