Application areas of online total hydrocarbon analyzer RS55-T
Emission Monitoring
process optimization
combustion control
Threshold Limit Value Measurement (TLV)

Typical characteristics of online total hydrocarbon analyzer RS55-T
TUV certification (German 17. BImSchw), meeting EPA certification requirements
Heated analysis room (adjustable up to 200 ℃)
Continuous measurement mode
Automatic and means range setting
Flame extinguishing indicator
Automatically turn off fuel
Automatic monitoring capability (temperature, pressure, flame)
Optional automatic calibration
Optional heating sampling pipeline
Optional pre filter
Optional built-in zero point gas and combustion air supply device
Optional data collection software
Can add sampling channels

RS55-T Technical Parameters
Range: 0~10/100/1000/10000/100000ppm (propane)
Other ranges can be customized according to requirements, such as 0-5/50/500/5000/50000ppm
Linear: better than ± 2% of the full range deviation (up to range 0-10000ppm)
Cross sensitivity:<± 2% of full-scale deviation @ O2
Detection limit:<2% of the lowest full-scale deviation
Zero drift:<2% of full range deviation per week
Span drift:<4% of full range deviation per week
Response time: approximately 1-2 seconds (without sampling pipeline)
Sampling flow rate: approximately 220 liters per hour
Signal output: 0~10V or 0/4~20mA
Status contact: Pre alarm
Main alarm
Range recognition
Flame extinguishing indicator
State recognition (zero gas, standard gas calibration)
Alarm (pressure, temperature, flame)
Environmental temperature:+5 ℃~+35 ℃
Power supply: 230 V/50 Hz@800 tile
Dimensions: Width 19 "x Height 267mm x Depth 500mm
Weight: Approximately 26.5Kg