>>>Sports module:The sports module is composed ofX Y ZComposed of three axes of motion,

●Single group itineraryX*Y*Z(280mm*320mm*100mm).

●The dispensing range isX*Y(280mm*320mm)

●X Y ZAll three axes use imported grinding screws,High precision linear guide rail,Ensure smooth operation of machinery.running speed0-800mm/sAdjustable

●Cooperate with imported servo motor drive,Achieve high work positioning accuracy and repeat positioning accuracy,The accuracy is0.02mm.

●To avoid vibration caused by high-speed movement, the motion support structure adopts a double cantilever beam gantry structure, and the support components are made of castings that have been heat-treated and processed to strengthen the rigidity of the machine.

>>>Glue dispensing module:

Glue dispensing module equippedCCDVisual alignment and high-speed diaphragm dispensingvalve,Paired with rubber cylinder supply system,Shorten the distance between the rubber barrel and the rubber valveDistance between,Ensure smooth supply of adhesive,Improve dispensing consistency,protectProve the dispensing accuracy.The rubber cylinder supply system can330CClargeCapacity rubber cup,Reduce the number of times glue is added. equipmentCCDVisual Alignment,For each productmarkClick to proceedVisual Alignment,Then it will be calculated by the computermarkPoint offset size,Perform automatic correction,Ensure precise product positioning,So as to ensureAccurate adhesive position

Characteristics of high-speed diaphragm valve:

● Imported high-speed diaphragm valve,Comes with adhesive valve driver,Can improve process control and adhesive consistency.Faster response time,Will not cause any changes in the process effect due to fluctuations in air pressure in the production environment or changes in the size of the dispensing valve air tube.

●High speed dispensing cycle.Cycle rate exceeds800second/minute

●The fastest execution speed only requires5-6ms

● Faster valve drive speed,Smaller dispensing size

●Improve process variability,Improve consistency of adhesive dots

>>>Positioning System Description:

● Equipped with positioning sensors,Testing products have/nothing.

●Equipped with product top height module and product lower pressing fixture,Exclude the impact of product deformation on the dispensing process,Ensure that the product is in a flat dispensing state.

● The top pressure fixture of the product is fixed with screws,Install corresponding top pressure fixtures when dispensing different products.

● When the product rises, it is guided in the positive direction by the guide block, so that the long side direction of the product is aligned withYThe axis is vertical, ensuring the dispensing accuracy of the two glue guns.

>>>Control module:

●The machine is controlled by a computer,Multi axis dispensing software,Chinese interface operation,Fault sound and light alarm and menu display.

● Can complete various straight lines/Diagonal line/rotundity/Fox shaped/3DGlue dispensing or coating of complex graphics such as images, planes, uneven heights, and interpolation.

● Halfway movement speed. Glue dispensing/Glue application amount,The program control can be changed arbitrarily.

●Can be importedCADGraphics andPLTGenerate motion sequence from the file to the machine.

>>>Technical parameters of online high-speed dispensing machine:

>>>Recommended JATEN devices:

Glue dispensing machine, one click image measuring instrument, microscope measurement, projector, image measuring instrument, fully automatic imaging instrument