TT-2000LAOnline fully automatic cleaning probe
Online fully automatic cleaning probeThe range applicable to mixed liquids and activated sludge in wastewater treatment is0~4000mg/las well as0~20000mg/lSolid concentration. High concentration reflux activated sludge can also be measured according to requirements(R.A.S),Digestion of activated sludge(S.A.S)Suspended solids or turbidity. The extended measurement range of the probe is also suitable for monitoringSBRThe solid content in reactors and similar engineering is as high as30000mg/lThe solid concentration. The large optical surface and simple volume ensure that the probe is convenient and highly corrosion-resistant during monitoring,The presence of deep substances such as fat and oil will not hinder the detection of the probe. The online fully automatic cleaning probe not only has automatic cleaning function, but also can keep the electrode surface always clean. Turbi-Tech 2000LAProbe usage860nmThe principle of infrared light scattering. This optical system is composed of cylindrical tubes connected internally and passing through a series of polyurethane skins, used for conveying clean engineering. This cleaning instrument is used at the end of the entire cleaning project2Nitrile‘H’Composed of rings. The cleaning project is carried out at a frequency selected by the user7200The monitor automatically transmits. Cleaning time only requires90second,In one5During the hour long cleaning cycle, the probe has been used for up to99.5%This probe can also be used for portable monitoring devices740To monitor the discharge water and mixed liquid.
Characteristics of online fully automatic cleaning probe
Probe Material: Black Acetal,316Stainless steel, glass
Protection level:IP68
Applicable instruments:PARTECHof7200
Probe features: with automatic cleaning function
Measurement range:minimum 0~4000mg/l maximum 0~20000mg/l
Technical Specification for Online Fully Automatic Cleaning Probe
Weight:2.2kg(Including)10Meter cable)
Size:80mmdiameterx 470mmlong
Protection level:IP68
Cable entrance: Integral cable joint
Probe Material: Black Acetal,316Stainless steel, glass
Sealing materials: polyurethane and nitrile (optional fluororubber)
Cable type:6rush pith 9MillimeterO/DPolyurethane coating
Cable length: standard10Meter, * height100rice
Service requirement: Fully automatic self-cleaning
Sealing service every3500**(depending on the application)
Environmental data: Operating temperature:0~50℃
Storage temperature:-20~60℃
Workplace: Indoor/outdoor
Power supply:7200monitor12VDC
Interface monitoring:0~5 mA
Measurement accuracy: superior to+ / -5% FSDThe actual sample
Resolution: depends on the range setting, usually+ / -2%
Repeatability: superior to+ / -1%FSDThe actual sample
Measurement principle:90°Light scattering, supportISO7027standard
wavelength/Frequency:860nminfrared
Response time:0.5second-Monitoring provided by damping
Rated pressure(Depth):10mWC
Traffic: unaffected by traffic, avoiding blind spots and extremes
*Large scale:0~4000 mg/l
*Small scale:0~20000mg/l, extendible to 1000 FTU for some applications
The measurement range will depend on the current monitoring of sample properties
