OmniScanUltrasonic testingUse two lithium batteriesOmniScanCan run6An hour,8.4Inch real-time display（60Hz A-Scan refresh rate),800 x 600The resolution of the monitor allows for clear visibility of defect details under any lighting conditions. It is easy to browse and select functions using the scroll controller and function keys. It can also be connected to a mouse and keyboard, closer to a personal computer interface.

OmniScanUltrasonic testingIt is a modular platform that allows for easy switching between different detection modules on site. This platform can detect new modules and automatically provide technical support, so that the configuration and detection environment will also be automatically set.

1OmniScanUltrasound software:

Full functionalityCscanning

1Monitor the amplitude, peak position, cross horizontal position, and thickness on each gate

2Components with large variations in thickness range use the automatic gate synchronization function that synchronizes with the previous gate

3、A-Scan data storage andC-Scan post-processing function

4, optionalIFThe gate is convenient for surface synchronization, or optional for measuring the gate orTCG/DACCurve

5、RFPositive or negative gates on the original signal (each gate is independent)

6Under single or multiple gate conditions3Complete alarm configuration for single or multiple channelsnFiltering of excitation frequency

7Amplitude and thicknessC-Customized color palette for scanned customers

8Two axis mechanical encoder ensures data acquisition and mechanical motion synchronization

9Optional database, convenient for users to process on personal computersA-Scanning and/orC-Scan

10、60Hz A-Scan refresh rate, the display inside the gate maintains envelope and peak values within the time interval

Full functionalityAscanning

Color optionsA-Scan display

Scrap mode

Virtual mode

peak value/Freeze mode (always displaying the gate)AThe maximum amplitude signal inside

Gate threshold crossing (curve color changes after exceeding gate height)

TOFD

ABScan and encode data for imaging and storage

Color palette contrast and brightness adjustment

100Mhz A-Sweep sampling frequency

Online offlineTOFDCalibration Wizard

Hyperbolic cursor andTOFDSize interpretation

Secondary synchronization of transverse waves

2、 Angle beam probe for weld seam detection

1Triangular defect localization using angle beam probe with curve correction

2, optionalDACandTCGCurve, used for compensating for beam divergence and material attenuation

3The number of nodes is16The maximum gain slope is20dB/usofDACGain correction

4Not only does it haveTCGIt also has mechanical encoding function and auxiliary calibration for probe delay and sound velocity.

5Supports pulse echo, twin crystal, or penetration modes

3、 Connectivity, data storage, and imaging:

In addition to providing standard servicesPCPort and alarm output function:USBInterfaceRS-232Interface, video output, and Ethernet interface. It can also be achieved through oneCFCard slot orUSBThe device provides internal and extended data storage capabilities.

4OmniScanInterface:

The interface has the feature of identifying probe codes and can recognize the probe model connected to the host

Set the appropriate probe frequency to prevent probe damage

Set the eddy current array probeCScanning resolution

Load the correct probe parameters

Reflective indicators are used for defect localization.