Oil moisture analyzerThe principle of microwave energy attenuation caused by absorption through substances can effectively eliminate the influence of oil quality and mineralization in the determination of water content in lubricating oil. The handheld oil moisture detector represents a new development in product moisture measurement technology. It uses microwave measurement technology to determine absolute moisture within 1 second, with high accuracy in measurement results, and is not affected by particles, colors, or any minerals contained in the product.

Oil moisture analyzerapplication

• Crude oil, heavy oil, engine oil, emulsified oil, lubricating oil, transformer oil and other oils

• Organic solvents such as ethanol;

• Daily moisture analysis in the laboratory;

• On site moisture analysis of incoming fuel tanker trucks;

• Oil burning user acceptance of heavy oil moisture analysis;

• Oil tanker exchange, oil moisture analysis in oil depots;

• On site analysis of moisture in engine oil/electrical insulation oil,

• Rapid testing of oil moisture in other occasions.

characteristic

• PPm-100% large range testing range, available for selection

• Test values can be seen in 2-5 seconds

• Pollution caused by volatile gases during distillation

• No harm to personal health from instruments and consumables

• No additional fees for consumables

• Low energy consumption; DC12V charger; 9V rechargeable battery

• Small size, light weight, easy to carry, easy to operate

• Easy keyboard operation, large LCD screen displaying real-time dust concentration

• Equipped with an RS-232 interface, it can be easily connected to a computer for data storage and processing

• Quickly detect dust samples and efficiently monitor air quality. It can be read in 2-5 seconds

• IP67 impact resistant, sturdy and lightweight portable case

• Technical Parameter

• Measurement principle	The principle of microwave energy attenuation caused by absorption when passing through matter
  Measurement object	Crude oil, heavy oil, engine oil, emulsified oil, lubricating oil, transformer oil and other oils
  test method	plug-in
  detection sensitivity	0.1%
  Measurement range	PPm-100% large range testing range, available for selection
  Measurement time	1s.
  repeatability	±0.5%FS
  monitor	128 × 64 LCD screen
  ambient temperature	0-80℃.0-95%RH
  power supply	Battery type: Nicd × 8 can be used continuously for 3 hours, equipped with a 220-9V charger for 7.2V
  size	Room temperature sensor: D38X300mm; High temperature sensor: D38X800mm; Handheld host: 204X100X36mm
  packing size	Room temperature: 415x335x120mm High temperature: 1000x260x110mm
  total weight	4.0kg (normal temperature) -6.0kg (high temperature)