JZL-D typenylon threadtensile testing machine nylon threadtensile testing machine nylon threadtensile testing machineManufacturer
1nylon threadtensile testing machineFunction Introduction:
nylon threadtensile testing machineSuitable for mechanical performance testing of metal, non-metal, composite materials and products through tensile, compressive, bending, shear, tear, puncture, cycling and other methods. Used to quickly expose defects and weak links in the product design phase.

IInylon threadtensile testing machineHost specifications:
1. Capacity: 500N, 2KN, 5KN, 10KN, 20KN, 50KN, 100KN (optional);
2. Measurement range: 0.4% -100% of the maximum test force;
3. Accuracy of test force: better than ± 1% of the indicated value (± 0.5% is a special choice);
4. Experimental power resolution: 1/300000 (no gear or equivalent 6 gears throughout the entire process);
5. Measurement accuracy of beam displacement: resolution higher than 0.0025mm;
6. Deformation accuracy: ± 0.5% (within the range of 0.2-10mm);
7. Speed range: 0.01-500mm/min infinite speed regulation;
8. Speed control accuracy: ± 1% (0.001~10mm/min); ±0.5%（10~500mm/min）；
9. Constant force, constant deformation and constant displacement control range: 0.2% -100% FS;
10. Constant force, constant deformation and constant displacement control accuracy: within ± 1% of the set value when the set value is less than 10% FS; When the set value is ≥ 10% FS, within ± 0.1% of the set value;
11. Deformation rate control accuracy: within ± 2.0% of the set value when the rate is less than 0.05% FS; When the rate is ≥ 0.05% FS, it is within the set value of ± 0.5%;
12. * * * Large stretching space: 600mm, compression space: 700mm, width space: 570mm;
13. Dimensions: 450 × 750 × 2200 mm;
14. Power supply: single-phase 220V, 50HZ, 1500W.

IIInylon threadtensile testing machineSoftware functions:
1. Modular functionality of testing standards: Provides users with the ability to set testing standards for their desired applications, covering testing standards and specifications such as GB, ASTM, DIN, JIS, BS, etc.
2. Sample data: Provide users with the ability to set all sample data, and input data once for permanent reuse. And the formula can be self modified to improve the fit of the test data.
3. Dual report editing: Fully open for users to edit reports for testers to choose from.
4. The lengths, force units, and display digits are dynamically interchanged, with force units of T, Kg, N, KN, g, and lb and deformation units of mm, cm, and inch.
5. Automatic * * * optimization of graph curve scale Auto Scale can display graphs at the * * * optimal scale. And it can dynamically switch graphics in real-time during testing. It has load displacement, load time, displacement time, stress-strain, and multi curve comparison.
6. The test results can be output in the form of EXCEL data format.
7. After the test is completed, it can be automatically archived or manually archived. After the test is completed, the maximum force, upper and lower yield strengths, hysteresis loop, stepwise approximation method, non proportional elongation strength, tensile strength, compressive strength, fixed elongation strength at any point, fixed load elongation at any point, elastic modulus, elongation rate, peeling interval * * * maximum value, * * minimum value, average value, bending modulus, and so on can be automatically calculated. Data backup: Test data can be saved on any hard drive partition.
8. The software has the function of demonstrating historical test data.

4nylon threadtensile testing machineScalable configuration:
Electronic extensometer; Large deformation (rotary or fixed); High and low temperature chambers; High temperature furnace; T-shaped workbench, fixtures or specially designed fixtures and accessories can be selected according to the test standards or test samples provided by the customer, and the cost will be charged separately.

5nylon threadtensile testing machineTest project:
（1） Common testing items:
● Tensile stress ● Tensile strength
● Tensile strength ● Elongation at break
● Constant tensile stress ● Constant elongation at constant stress
● Fixed stress value ● Tear strength
● Pressure test ● Bending test
（2） Special testing items:
1. Elastic modulus, also known as Young's modulus of elasticity, is the ratio of the normal stress component to the normal strain in the same phase. To determine the coefficient of material rigidity, the higher the value, the stronger the material.
2. Proportional limit: The load can maintain a proportional relationship with elongation within a certain range, and its maximum stress is the specific limit.
3. Elastic limit: The maximum stress that a material can withstand without permanent deformation.
4. Elastic deformation: After removing the load, the deformation of the material completely disappears.
5. Permanent deformation: After removing the load, the material still retains deformation.
6. Yield point: When a material is stretched, the deformation increases while the stress remains constant, and this point is called the yield point. The yield point is divided into upper and lower yield points, and generally the upper yield point is taken as the yield point. Yield: When the load exceeds the proportional limit and elongation is no longer proportional, the load will suddenly drop, and then fluctuate up and down over a period of time, causing significant changes in elongation. This phenomenon is called yield.
7. Yield strength: The value obtained by dividing the load at which the permanent elongation reaches a specified value during stretching by the original cross-sectional area of the parallel part. 8. Spring K value: the ratio of the force component in phase with the deformation to the deformation.

VInylon threadtensile testing machineAttachment:
A、 One year warranty and one Chinese operation manual.
B、 Randomly give away a set of standard fixtures (other fixtures can be purchased).
C、 A dedicated testing software.
D、 One set of branded computers and one color printer.

Note: Special specifications can be customized.

www.jsxjsyj.com