Product Introduction

The NT series submersible desulfurization pump is a vertical desulfurization submersible pump developed by our company based on the characteristics of industrial flue gas desulfurization and the advanced technology of similar products at home and abroad; Mainly used for conveying various slurries containing solid particles at temperatures below 100 ℃; The concentration of the conveyed liquid should be less than 50%, the maximum particle size should not exceed 80 mesh, and in special circumstances, it should not exceed 60% of the minimum size of the flow surface.

1.1 Model Meaning

For example, NT150-315

NT - Vertical Submersible Pump Code

NT - Code for desulfurization dedicated pump

150- Pump suction inlet diameter 150mm

315- nominal diameter of impeller 315mm

1.2 Performance Range

Flow rate: 1.6m3/h-3000m3/h

Lift: 5m-80m

Design pressure: 1.6MPa

Temperature of conveying medium:- 20℃-100℃

Pump structure description

The NT series submersible desulfurization pump is a cantilever centrifugal pump when the submersible length of the pump is less than 1.8 meters. The submersible part has no bearings, seals, or vulnerable parts, and is maintenance free; This structural pump is mainly composed of pump body, impeller, pump cover, support pipe, pump frame, shaft and other components.

The NT series submersible desulfurization pump is a vertical long axis submersible centrifugal pump when the submersible length of the pump is greater than 1.8 meters. The submersible part is equipped with wear-resistant and corrosion-resistant sliding bearings; This structural pump consists of pump body, impeller, pump cover, lower wear-resistant sliding bearing, middle wear-resistant sliding bearing, support tube, pump frame, shaft and other components.

Structural diagram of NT type submerged desulfurization pump