The stainless steel air shower room is a necessary small room for personnel to enter the clean room, so frequent opening and closing of doors, forced pushing of interlocking doors during the blowing process, and non-standard operations can cause damage to the air shower room door, door lock, and related electronic components, affecting normal operation. In response to the above situation, our company has designed and produced automatic sensing doors to reduce personnel movements and make them more user-friendly. Due to the long-term operation of opening and closing doors, the quality requirements for electrically controlled automatic doors are relatively high. The general control method is to manually press the button switch at the entrance, and the rear door will automatically open after the shower is completed. Some clean rooms do not have a side passage for personnel to leave the clean room due to production process requirements or the owner's desire to reduce project costs. Personnel must also pass through the air shower room when leaving, so sensors are installed to sense the door opening when leaving. This places a heavy burden on the air shower room and requires higher quality for automatic doors.
2、 Characteristics of air shower room:
★ 1. Adopt arc corners that are more suitable for clean room principles;
★ 2. Purification level: Static thousand level;
★ 3. The overall material of the box is 50 type purified color steel plate;
★ 4. There is a partition high-efficiency filter with a filtration efficiency of 99.99% @ 0.3 μ m, ensuring the purification level;
★ 5. Soft key touch type time relay, LED LCD display and set shower time, adjustable from 0-99s;
★ 6. Power supply: 220V, 50HZ, 1.1KW;
★ 7. When this product leaves the factory, it is tested one by one according to the US Federal Standard 209E and has high reliability
3、 The use of air shower channels:
(1) Personnel entering the barrier environment should take off their outer clothing and remove items such as watches, mobile phones, and accessories in the external changing room.
(2) Enter the changing room and wear a clean suit, hat, mask, and gloves.
(3) When personnel enter the air shower channel, first adjust the air shower time, gently touch the power button on the air shower room panel, then press the lighting and fan buttons to enter the air shower channel, close the air shower channel door, and start blowing

Function and characteristics of air shower room and air shower channel configuration:
■ Adopting fully automatic control operation, dual door electronic interlock, infrared induction automatic blowing, and dual door locking during blowing.
The cold plate spray coating series adopts multi-layer acid washing technology and electrostatic dust-free spray coating treatment.
The door, door frame, handle, thickened floor panel, and air shower nozzle are made of all stainless steel as the basic configuration.
Adopting LCD time display, the air shower time can be adjusted from 0 to 99 seconds, and the air shower time is displayed.
Adopting a dedicated fan for the air shower room to supply air and achieve a super strong wind speed of no less than 25m/s, ensuring that personnel and goods entering the clean room achieve a perfect dust removal effect.
Adopting advanced silent system, the operation is quieter and has less impact on the personnel working.
The air shower room is divided into a human shower room/a cargo shower room, which serves as the necessary passage for entering the clean room and functions as a closed and clean room with an air valve. can
Reduce the pollution caused by people/goods entering and leaving the clean area. In order to reduce the large amount of dust particles caused by the entry and exit of people/goods,
After efficient filtration, the high-speed clean airflow can be rotated and sprayed onto people/goods, effectively and quickly removing them from non clean areas
The dust particles and bacteria brought by the area.
The main difference between an air shower room and an air shower channel is the length of the air shower area. The external dimensions of a standard air shower room are 1400 * 1000 * 2200,
1400 * 1500 * 22001400 * 2000 * 2200 (unit: MM) width * length * height, external dimensions of the air shower channel 1400 * N * 2200 (unit: MM)
Width * Length * Height.
Stainless steel air shower room and air shower channel add optional practical functions:
1. The photoelectric induction automatic function system can adjust the door delay time.
2. Automatic identity recognition system (with built-in readable sensor card, password, fingerprint, etc.).
3. Automatic ozone sterilization system and automatic ultraviolet sterilization system.
4. Automatic static ion removal function system, system heating function (used in colder winter).
5. Adjustable delay door opening function system (in order to prevent dust from flying into the clean area after blowing, the door can only be opened and enter the clean area after a pre-set time after blowing is completed).
6. Filter failure warning function system (can automatically remind to replace the high-efficiency filter when it reaches the final resistance).
7. Voice prompt function.
8. According to requirements, the air shower room and air shower channel can be configured with functions and features:
■ Adopting fully automatic control operation, dual door electronic interlock, infrared induction automatic blowing, and dual door locking during blowing.
The cold plate spray coating series adopts multi-layer acid washing technology and electrostatic dust-free spray coating treatment.
The door, door frame, handle, thickened floor panel, and air shower nozzle are made of all stainless steel as the basic configuration.
Adopting LCD time display, the air shower time can be adjusted from 0 to 99 seconds, and the air shower time is displayed.
Adopting a dedicated fan for the air shower room to supply air and achieve a super strong wind speed of no less than 25m/s, ensuring that personnel and goods entering the clean room achieve a perfect dust removal effect.
Adopting advanced silent system, the operation is quieter and has less impact on the personnel working.
The air shower room is divided into a human shower room/a cargo shower room, which serves as the necessary passage for entering the clean room and functions as a closed and clean room with an air valve. can
Reduce the pollution caused by people/goods entering and leaving the clean area. In order to reduce the large amount of dust particles caused by the entry and exit of people/goods,
After efficient filtration, the high-speed clean airflow can be rotated and sprayed onto people/goods, effectively and quickly removing them from non clean areas
The dust particles and bacteria brought by the area.
The main difference between an air shower room and an air shower channel is the length of the air shower area. The external dimensions of a standard air shower room are 1400 * 1000 * 2200,
1400 * 1500 * 22001400 * 2000 * 2200 (unit: MM) width * length * height, external dimensions of the air shower channel 1400 * N * 2200 (unit: MM)
Width * Length * Height.
2. Automatic identity recognition system (with built-in readable sensor card, password, fingerprint, etc.).
3. Automatic ozone sterilization system and automatic ultraviolet sterilization system.
4. Automatic static ion removal function system, system heating function (used in colder winter).
5. Adjustable delay door opening function system (in order to prevent dust from flying into the clean area after blowing, the door can only be opened and enter the clean area after a pre-set time after blowing is completed).
6. Filter failure warning function system (can automatically remind to replace the high-efficiency filter when it reaches the final resistance).
7. Voice prompt function.
8. Non standard customization is available upon request. Non standard customization.