The filter is designed as a 0.22 μ m PES (polyethersulfone) asymmetric membrane filter, heat sealed on a styrene acrylonitrile shell to minimize organic and inorganic extractable releases.

Millipak^®The pure water and ultrapure water produced by 0.22 μ m filters are suitable for many different laboratory applications, including microplastic research, [1] nanoparticle research, food analysis, and HPLC analysis. [2]

• Each Millipak^®0.22 μ m filters have been individually tested, sealed, and accompanied by quality certificates.
• After verification, it can provide bacteria free water (<0.01cfu/mL when installed and used in a laminar flow hood)
• Carefree maintenance: Easily installed and replaced.
• Redesigned bottom-tip for a secured installation of the protection bell.
• Validated to deliver particulate-free water (no particles with size >0.22 μm）
• E-Sure tag, used for E-POD^®Or Q-POD^®The distributor can achieve full traceability (data management) and automatic consumables status monitoring on the POD touch screen interface.

instructions:

• Biological interception: Microorganisms
• Function: Filtering
• Application: Laboratory General Analysis
• Design purpose: Water purification
• Instructions for use: The water provided by this product is 0.22? M sterilization grade membrane filtration. Please refer to the "Using the System" section of the system device user guide (provided in the USB key of the system packaging box).
• Storage Statement: Dry Storage
• Disposal statement: Dispose in accordance with applicable national, provincial, and local regulations.

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany