A milk storage tank is a stainless steel storage tank used to store milk, also known as a direct cooling milk storage tank or stainless steel direct cooling milk storage tank. Direct cooling storage tanks are mainly used for cooling and storing fresh milk, as well as other liquid materials. They are ideal cooling and storage equipment for pastures, milk stations, dairy factories, food factories, beverage factories, and pharmaceutical industries. The direct cooling milk storage tank adopts fully automatic control, with a large area of straight wall cooling. Through the fully automatic control system, a one-step observation operation is carried out to quickly reduce the cooled raw milk to the required temperature ℃ and maintain a constant temperature to prevent bacterial growth and keep the raw milk in a fresh state. The electric control box and milk tank are integrated in structure, making it easy to operate. The combination of milk tank equipment and electrical control box can automatically control the temperature of the refrigeration system.
The compressor has high pressure fault protection and motor overload protection (high pressure protection value is 2.0MPa, low pressure shutdown value is 0.2MPa). In case of the above faults, the circuit will automatically disconnect, alarm, and the compressor will stop working. At this time, the fault must be checked and eliminated before pressing the reset button to continue working. When the milk storage tank needs to be pre cooled, it can be manually turned on. The mixing motor works synchronously with the compressor. When the compressor stops working, if necessary, the mixing switch can be set to automatic mode. At this time, the mixer will enter adjustable intermittent rotation.
When milk is stored for a long time, if the temperature of the milk in the tank is higher than the set temperature (adjustable), the compressor will start automatically to cool until the temperature of the milk in the tank drops below the set temperature (adjustable), and then automatically stop, thus achieving the purpose of cooling. The direct cooling milk storage tank adopts imported compressors and safety protection system performance, energy-saving, fully enclosed compressors. The insulation layer adopts polyurethane foaming process, which has good insulation effect. The direct cooling milk storage tank is made of stainless steel, which is hygienic and clean without dead corners, and can be cleaned online. Welcome to customization!